Quick 9r review

Dazzler

Active VIP Member
Joined
Oct 22, 2009
Messages
924
Reaction score
2,067
Location
Cochrane Ab
So a properly clutched 850 runs as strong as the 9R?
Not if the 9R is properly clutched.. I have a 21 and 22 Matrix, both 850 Khaos 165’s, I demo’d a 9R 165 Khaos, pulled the 72’s weights and put in 76’s, spinning 8300-8350 at 5500-6000’. It’s still in break in, and the 850’s don’t catch it. I don’t do aftermarket clutching, I use OEM springs weights etc. and keep them fresh.
If aftermarket clutching will improve the 850’s, I assume it will the 9R as well.
 

Teth-Air

Active VIP Member
Joined
Oct 16, 2008
Messages
3,751
Reaction score
7,964
Location
Calgary/Nelson
That’s actually not a bad idea. My g4 skidoo has been one of the most reliable sleds I’ve ever owned.


Sent from my iPhone using Tapatalk

You would get top dollar for it now, for the chaincase and drive axle.
 
Last edited:

Dazzler

Active VIP Member
Joined
Oct 22, 2009
Messages
924
Reaction score
2,067
Location
Cochrane Ab
You can't compare primary weights in an 850 to primary weights in a 9R, because they are different primary clutches.
I wasn’t. Just staying the fact that the 9R are coming out way to light.
 

jhurkot

Active VIP Member
Joined
Nov 2, 2008
Messages
3,799
Reaction score
14,592
Location
Monarch, AB
ea1f9abef2cd3200bc284299d64fa123.jpg



Sent from my iPhone using Tapatalk
 

adamg

Active VIP Member
Joined
Mar 8, 2011
Messages
3,450
Reaction score
4,662
Location
S'toon,SK
ea1f9abef2cd3200bc284299d64fa123.jpg



Sent from my iPhone using Tapatalk

Snowcheck your own on March 6th! The latest in high performance snowmobile technology.
You'll have to explain what we are looking at here. Is this your 9R with the P85 that is now split like the P22 - suggesting the 9R is very hard on primaries?
 

gedakbx

Active VIP Member
Joined
Feb 26, 2010
Messages
1,019
Reaction score
1,935
Location
central alberta
JH this is how we did it, ours was broken just like yours. Drilled it and got the sheave to break off the metal internal taper. Then slowly ground down the taper until it released from the crank shaft. Be careful when drilling , you don't want to drill into the oil line or crank seal behind the clutch.
 

Attachments

  • clutch.jpeg
    clutch.jpeg
    365.7 KB · Views: 135

drew562

Active VIP Member
Joined
Mar 13, 2008
Messages
4,838
Reaction score
18,696
Location
edmonton
Good lord. I hope you stay have 2 legs.
My buddies 22 boost blew the clutch a full throttle. He was standing off centre to the right, and on its way out of the hood. It tore his Klim pants leg and ripped the arm pit of his jacket. Full warranty and Polaris is crediting him $500 for his snow gear. Never did find the clutch.
 

snopro

Active VIP Member
Joined
Mar 3, 2009
Messages
101,829
Reaction score
90,585
Location
Milo,Alberta
My buddies 22 boost blew the clutch a full throttle. He was standing off centre to the right, and on its way out of the hood. It tore his Klim pants leg and ripped the arm pit of his jacket. Full warranty and Polaris is crediting him $500 for his snow gear. Never did find the clutch.
My buddy Russell Liba was practicing on the track at one of our NWSA races way back when and blew a clutch off his supermod sled and it went through the guard, the hood and they found pieces of it on the opposite straightaway on a 3/8 oval track. Serious business.
 

LUCKY 7

Active VIP Member
Joined
Jan 17, 2009
Messages
5,927
Reaction score
9,206
Location
Sparwood
withe everyone sueing for no good reason I wonder when we hear of a lawsuit for the exploding clutches and the injuries from it?
 

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
19,911
Reaction score
42,097
Location
Sherwood Park, Alberta, Canada
for all the dumb sh*t they do stop rides for primary clutches exiting the snowmobile on a regular basis is what i would consider pretty serious safety issue. I dont know how you can hold that thing wide open without any concern johnny good on ya lol. Id have PTSD after that
 
Last edited:
Top Bottom