stuff to do on SxS before next ride

[arff]

Hitch getting build this week

Stilling looking for cup holders

 

[imdoo'n]

Hitch getting build this week

Stilling looking for cup holders

will these cup holders work??

 

[arff]

No no no

 

[neilsleder]

will these cup holders work??

Bet those would make your beer hot! And sticky!


Sent from my iPhone using Tapatalk

 

[RZR101]

Larry you need help.

 

[rzrgade]

Lone wolf 101.......

 

[imdoo'n]

new support vehicle/ camper, for those times when you can't carry enough axles.

 

[arff]

wash, grease, check over, find cup holders

 

[imdoo'n]

may be a good idea to carry a fire extinguisher or a couple gallons of water in this dry weather. the chances of muskeg smoldering on the exhaust will be very high, as well as grass fires .

 

[rzrgade]

Got some new shoes ... Just in case it rains ......

Sent from my iPhone using Tapatalk

 

[doorfx]

Got some new shoes ... Just in case it rains ......//uploads.tapatalk-cdn.com/20160511/b8c47628c40a7426c2c9339ce632b897.jpg


Sent from my iPhone using Tapatalk

What are those?

 

[rzrgade]

ITP Cryptid's... 30's just released.

 

[DaveB]

Got some new shoes ... Just in case it rains ......//uploads.tapatalk-cdn.com/20160511/b8c47628c40a7426c2c9339ce632b897.jpg


Sent from my iPhone using Tapatalk

Proper!

 

[j335]

may be a good idea to carry a fire extinguisher or a couple gallons of water in this dry weather. the chances of muskeg smoldering on the exhaust will be very high, as well as grass fires .

Good idea. I've got a fire extinguisher packed in my box along with carrying and axe and collapsible bucket.
We battled a brush pile fire last year and we found axes were our best tool since there wasn't water nearby. We just controlled it from growing and eventually burnt itself out.

Any of you guys mounting your fire extinguisher to the roll cage? How you gonna do it?

 

[arff]

Remove the skid plate. Need to remove the mud Ron H made me drive in.

Finish installing the antenna

 

[imdoo'n]

Need to find what making the ring in the inner cv joint come apart


Sent from my iPhone using Tapatalk

 

[BIG DAWG]

Need to find what making the ring in the inner cv joint come apart


Sent from my iPhone using Tapatalk

you have a bracket lift??

 

[imdoo'n]

Yes, joint will come apart if pulled on. Trying to pull cv joint from front diff, Usually results in axle pulling out of cv joint.
Appears to be fine mud? No rust present on cv end.


Sent from my iPhone using Tapatalk

 

[BIG DAWG]

theres a good chance with the bracket lift upon full extension you have ground the inside of the cup enough to damage where the ring seats...
I have tried different brackit lifts in the past and had this issue and ended up building my own in between stock and said bracket lift height...

consider pulling opposite axle and driving the axle your having issues out with a bar from the otherside through the diff
(not sure if this will work on your particular machine but a trick I have used in the past)

 

[imdoo'n]

No don't think that will work, Has cups in diff, I got axle stub out, Used home made puller, I need to clean it up and take a good look.


Sent from my iPhone using Tapatalk