Pappillion
Active VIP Member
I have a 2002 Rev 800 that cooked a piston so i went out and bought a small block to replace it. Did one trip and on the second day that motor blew up on me with the exact same problem.
The inside piston ran to hot and blew a hole in the top of it on the front side. As well the outside piston's rings had worn down and the piston itself showed signs of being to lean.
I originally thought that the first motor had just went due to age but having the second motor do the same thing within 200 km makes me think that there is another problem. Some people have told me that it could be the computer and some have told me that it could be jets or even DPM. No changes to the motor had been made prior to the blowouts.
Any advice would be great.
The inside piston ran to hot and blew a hole in the top of it on the front side. As well the outside piston's rings had worn down and the piston itself showed signs of being to lean.
I originally thought that the first motor had just went due to age but having the second motor do the same thing within 200 km makes me think that there is another problem. Some people have told me that it could be the computer and some have told me that it could be jets or even DPM. No changes to the motor had been made prior to the blowouts.
Any advice would be great.