Search results

Anyone else have an experience with this? If i mash the flipper, it will very rarely hit 8200, usually it really bounces between 79-8000 with it held to the bar. If I roll it on slow-like then it does not want to seem to waver as much. I havent had a chance to do a long sustained pull but it...

Jus' wondering if anybody is running the feethooker inserts on a rev, I haven't been able to find any pics of the sort.:beer:

Still trying to figure out a mid-range (5500-6500rpm) burble on my new-to-me sled that is really taking all the enjoyment out of it... There is a timbersled intake on it and I've read that this will sometimes flow less air than the stock airbox. I feel like its running rich, I did a couple...

Just picked up a 07 the other day. I know nothing about it other than it supposedly has a rebuilt engine with 100kms, it still had half a tank of 40:1. Smelled like full synthetic in the oil tank, and I put a half a jug of brp semi-syn in there. I did mix a little oil in with the gas as well...

What is the id of the lower rad hose? I need to order the proper size hose adapter....\Was going to go with the round digital Koso gauge, anybody using this one?

Have to replace injector pump on the truck, cant go to pick up a sled, anybody travelling down south next few weeks or so that could pick up a sled and bring to revie or kelowna? Have a few hundred for delivery...pm me for more details, thanx

...that might have room for a sled? Looking at a couple on this forum that might need a new home... ian 250-357-2664

Really close to buying a couple of sleds not in my province, I really need some input on what to ask for as far as pictures on the 08-09s, and even looking at a couple of cheap 07's... Im not super familiar with the xps but I have enough buddies riding them hard to justify myself having one...

Would anybody be able to tell me the approximate weight of a 159" track? For shipping purposes:D thanks

I dont know if this should go in the xp section or not, but anyway...Im looking for an 07 and am wondering what the difference is (if any) between the 'updated' engine and the 08-09 800r....is the factory rebuilt the same for all these sleds? (I understand it should have an R stamped behind the...

Posting for a friend who's 08 M8 crapped out last weekend....Started cuttting out and popping around 6500 rpm, and then started doing it down to half throttle....we went over it and found some reed problems, but it still ran the same. To the dealer it went, who found some melted wires on the...

Ive heard that there is a nylon washer/shim available for the end of the crank, to avoid dissassembling the spider, etc. on p-85 clutches to adjust sheave-to-sheave clearances....can anybody confirm this? I am imagining that there must be an easier way to adjust primary belt clearance than...

Hey just a feeler, but does anybody in the Salmo/Fruitvale area have a primary puller to loan for a minute or two (the block is out of the sled already), I dont really want to drive out to playmore if'n I dont have to...cheers

hey all, I'm helping my friend replace the engine in his 800ho. The local dealership here has a rep for gouging, but they gave him a price of 18-1900 for the engine, which seems fair, ($2K to install, tho) :confused: but I would like something to compare it to, what are you Alberta guys paying...

Just wondering if anybody has used both and which one they found superior for mid-range power and noise... (or is it really any contest haha) I have seen the slp dyno charts, what I am looking for is more of a mid-range grunt, what I am finding is a few good deals on twin setups...what are...

Trying to do some research on a secondary setup for my 97 rmk..I have the engagement and revs where I want it but she still trenches pretty good with a 151...what should I be looking for as far as angles, I've read that a straight angle might give a more controlled lower rpm hook than a...

I feel I need to mess with my secondary this year, I've put a 151 on my 700 and have 19/42 gearing.... As far as I have been able to tell, the stock helix angle for a 97 was around 45-34? Does that make it an R-11? What would be a good deep powder boondocking setup for this sled..there is a...

Just fired up my 700 yesterday on the stand and noticed the revs weren't climbing as fast as I would like....up to 5 or 6000 was fairly good but from 6-8000 it seemed to climb a little slower than I remembered...I cleaned my clutches last year and I think I changed the weights to 55 from...

Would anybody happen to know if a set of 99(non-ves) twin pipes will fit on my wedge chassis without too much trouble...also, jetting changes? thanxs

Does anybody know of a station or two around the 'gar or nelson that sells marked premium for the boys out in Ymir?