Samuel
Member
so i have took my dd apart three times this year first time cleaned it up and changed oil second time just to check all the gears to make sure it was good before season but i didnt get all the oil inside and didnt get good seal on the cover so i took it apart again yesterday and when i was trying to pull the cover off it seemed extra stiff so when i got it apart the second gear that can be removed that goes into the planetary was cock-eyed in where the small bearing fits in on the cover and im just wondering is it because i shoved that cover on the second time or can that gear not sit right inside... i just do not want to be ripping around and it to blow apart. (also after i put it all back together i ran it with the track up and went to about 50 km/h just to see if it was all right and the track still moves freely by hand)