Eagle
Active VIP Member
Just read on snowest about guys breaking primary spring on their 2012 Pros, after installing the HPS can. Has anyone experienced this here?
The springs were braking last year (bad run) nothing to do with the HPS can Change it out to a slp blue pink and call it a day. I have seen 3 2012 pros with broken springs already do not put another polaris black spring back in.
Is it just the pro rmks or the switchback assaults as well
Check if you have the black spring ???
Is it the blue one you guy are switching too? Do I have to change anything else or jut take the black out and put the new one in? Does it change anything or do I have to change anything else? Sorry I'm not a clutch guy lolBring a spare spring or change it out.
Is it the blue one you guy are switching too? Do I have to change anything else or jut take the black out and put the new one in? Does it change anything or do I have to change anything else? Sorry I'm not a clutch guy lol
The blue / pink SLP spring has a 10lb higher finish rate than the stock spring, so it'll may gain a little bit more RPM. It'll be awfully close. That's all you'll have to change.
So just the six outside bolts
100 in/lbsThanks alot I'll get a new spring today.. Is the a certain foot pound the Bolts hve to be set to
It's 14ft/lbs100 in/lbs
100 in/lbs