Linkz
Active VIP Member
I installed the RK TEK secondary clutch and they say they recommend a 1" deflection with slight pressure, what does that mean?? Where do i measure from? A brand new belt sits 3/32 above the sheaves right now. Its a 2008 M8.
I installed the RK TEK secondary clutch and they say they recommend a 1" deflection with slight pressure, what does that mean?? Where do i measure from? A brand new belt sits 3/32 above the sheaves right now. Its a 2008 M8.
The way that i set belt deflection is make sure tha the sec clutch is closed as much as it will then grab the belt at the primary clutch center.. Grab it on the top and bottom and make sure that there is just a hair of play on the primary clutch.. You want it to be as snug as possible without it dragging at all or the sled will want to creep at idle. Hope it helps..