Switch
Active VIP Member
To all,
I'm just finishing off rebuilding my double wide sled trailer ( tires , bearings new ramps, etc) when I ran in to the following issue's. First issue was when I purchased a new tire to match my unused spare, tire size was 5.30 X 12 load range C there was a big difference in tire height and width from new to old same size. Anyone knows when they changed the size's ?. 2nd issue was with bearing kits that come complete with dust seals, the bearings were the correct for 1 1/16" spindles but the seals were too small, Princess Auto said that axle sizes have changed and that they are supplying thier kits with the smaller seals. Should have my trailer ready for this weekend and might try The Whitecourt area, anyone know the conditions out there?.
Regards,
Switch
2004 Polaris 700 Switchback
1998 Polaris 440 LC Indy ( The Bosses)
I'm just finishing off rebuilding my double wide sled trailer ( tires , bearings new ramps, etc) when I ran in to the following issue's. First issue was when I purchased a new tire to match my unused spare, tire size was 5.30 X 12 load range C there was a big difference in tire height and width from new to old same size. Anyone knows when they changed the size's ?. 2nd issue was with bearing kits that come complete with dust seals, the bearings were the correct for 1 1/16" spindles but the seals were too small, Princess Auto said that axle sizes have changed and that they are supplying thier kits with the smaller seals. Should have my trailer ready for this weekend and might try The Whitecourt area, anyone know the conditions out there?.
Regards,
Switch
2004 Polaris 700 Switchback
1998 Polaris 440 LC Indy ( The Bosses)