cv boot clamps

Transporter

Active VIP Member
Joined
Dec 22, 2008
Messages
257
Reaction score
25
Location
Alberta
The clamps that come with kimpex boots how do you tighten them doesnt look like you use a special tool they just have a couple barbs?
 

grizzley1

Active VIP Member
Joined
Sep 6, 2008
Messages
247
Reaction score
0
Location
ponoka
them kimpex boots were did u get them, are they an after market thing and what are they worth.
 

Transporter

Active VIP Member
Joined
Dec 22, 2008
Messages
257
Reaction score
25
Location
Alberta
I ordered mine from royal distributing for 20 bucks which includes grease and the clamp that im not sure how to get tight.I think that t @ t powersports in bonnyville sells them though, not sure on his price.They were 63 bucks from a dealer.
 

ttpowersports

Active VIP Member
Joined
Dec 21, 2008
Messages
2,384
Reaction score
914
Location
bonnyville alberta
ya there about 20 bucks, you can also get just replacement clamps set - enough for two boots,, 6 or 7 bucks..... i think the guys in the back use a tool available from bumper to bumper its about 20 bucks or like they tell me if your as good as them you can do it with a pair of needle nose and a flat screwdriver... id buy the plyers and not f with it.......

T


so is it better to get booted or greased?.........hmmmm just a little humour,
 

Transporter

Active VIP Member
Joined
Dec 22, 2008
Messages
257
Reaction score
25
Location
Alberta
Yah my friend had a pair of the pliers, simple simple.Seen pliers now in princess auto and napa for about 20 bucks.
 
Top Bottom