Stever
Member
I hit a rock pile!! and bent the bulkhead slightly on my '06 Summit X 151, if I measure from the Hem-joint on the upper A arm to the back of the tunnel I'm 3/4" shorter on the damaged side. When I tipped the sled on it's side I notice that aluminum 'L' Bracket that the lower A-arm bolts to is bent slightly (1/16"). When I hit the rock pile, it also bent my ski! I took the carbides off and it's still stayed bent. What (if any) bulkhead bend is acceptable? I realize it's a complete tear down to replace the bulkhead, does anyone have experience doing this? Should I just scrap the sled? Thanks for anyones input. I could get some pics if that would help.
Steve
Steve
Last edited by a moderator: