Anyone looking for a cool winter project??

[Kyle91rs]

I have a brand new chevy small block that I had built in Calgary, was going to put it into my Camaro but since have went with a fuel injected 6.0 on nitrous... Anyways, the engine has about 450hp. The block is painted daytona copper, has all new parts, gm cast crank, 327 double bump heads, the block is a 1974 year 4 bOlt studded mains, edelbrock rpm air gap intake, demon 750 carb, all chromed out, very nice show style engine. Lots of spare chrome pulleys, gauges, gaskets, plugs, comes ready to drop in. Also have a rebuilt t56 6 speed mated to it with a centerforce clutch, ram aluminum flywheel, brand new clutch master and slave cylinder. Comes with an adjustable fuel pressure regulator set up for that engine. I also have a crossmember to bolt it into a third gen 82-92 Camaro. I have the complete swap materials for a Camaro. Now you're probably thinking to yourself, "well that's great, but I don't have a Camaro..." well, here's the catch, if the sled is fair trade value I will also throw in my 92 25th anniversary Camaro I have. Right now the interior is stripped down for restoration but it's complete minus the stock motor and trans. Let me know if you're interested in any trades. I'm not looking for a specific brand just throw anything at me of equal value. I have about 12,000$ into this project so anything reasonable just ask. Willing to do trades for just engine and trans, or package for entire thing. Pm me for pics. Thanks.

 

[Kyle91rs]

Bump!

 

[Summitric]

Do you have any pics of engine and everything, and of the '92 25th anniversary camaro?

 

[Kyle91rs]

Yup sure do! Pm me your email address and I'll send you some pics!

 

[Kyle91rs]

Figured out how to use tapatalk.. Here's the pics!


Sent from my iPhone using Tapatalk

 

[Junior Highmark]

fawk that would be a rocket.

Sent from my Nexus S using Tapatalk

 

[lane3030]

fawk that would be a rocket.

Sent from my Nexus S using Tapatalk

no chit! i'd like to see some lil ricers keep up to that...

 

[Kyle91rs]

I know this is a sled forum, but seeing as this is gathering some interest.. This is a picture of my main car, and the sole reason why I'm getting rid of this one It's a 1991 Camaro rs, painted cyber metallic grey, it has a 6.0L LQ9/6 speed trans, 665 rwhp, 12 bolt moser rear, all new adjustable suspension including yellow Koni shocks/struts, hotchkis front and rear sway bars, corvette c6 wheels, corvette leather z06 seats, 125 shot of nitrous... La di da. Still not done. Thanks for the posts guys! Hopefully someone takes me up on this offer!


Sent from my iPhone using Tapatalk

 

[teeroy]

how much for just the engine? looking for one to drop in a nova....

 

[Kyle91rs]

I quoted a guy 2500$ for the trans and swap materials. So if you have interest in the engine, I'm gonna say 4500. The specs are as follows:****1974 Chev 350 (.030" over)Studded mainsComp X-treme energy 296/302 split duration cam and Lifters (.530 lift)Gear drive timingMoroso push rods (with girdles)Edelbrock fuel pumpEdelbrock Performer Rpm Air Gap intakeDemon 750 cfm Carbeurator7000 RPM rated performance HEITall Chevy Performance valve covers14" x 4" (i think) K & N air cleaner****1967 327 (double bump) GM headsone piece 1.94" intake valves, 1.6" exhaust valves (Exhaust slightly O.S.)1.4" double valve springs1.5-1 ratio roller rockers3" Mr. Gasket HeadersAluminum pulleysChrome oil panAprox. 11-1 compression ratioPainted Dodge Daytona copper What kind of trans do u have in the nova? I have a few parts to fit a turbo 400 as well, like chrome starter, new b&m oil pan, all kinds of parts. To get the engine built, and with all the parts I'm throwing at ya with the engine, trust me it's worth it. If you would like to know more, just say so. I'm actually in Edmonton right now for the night maybe could go for a coffee or something tomorrow and talk business! Haha. I'm coming back down whenever the new 1100t comes in so I can even deliver it. Summitric, let me know if you are interested, I would like to get rid of the ENTIRE package. I have too many projects going on right now. IF ANYONE IS INTERESTED******I also have a 2001 Camaro ss with an ls1 6speed for sale. Had about 500hp to the wheels with a fresh aftermarket top end.Also have a 91 gta with a 4th gen 93-02 Camaro dash swap, full aftermarket suspension, amazing paint, just a rolling chasis. Valued around 6-7000$ as is. ALSO, I know I know, I have WAYYYYY too much ch!t laying around, I have an ls7 engine 7.0L with very low miles, complete out of a 06 z06. Engine is worth 12g. There's an engine for you teeroy I'm up for trades for sleds, sales, whatever. Just throw some offers at me if anyone's interested in anything lol.

 

[Kyle91rs]

Annnnnyyyyyonneeee?

 

[Kyle91rs]

Still have the 355 and Trans if anyone is interested. Will sell total package for 6000$

 

[overkill131313]

can you tell me more about the 2001 SS? pics? $$??

 

[Kyle91rs]

It has an ls1 with fast intake, afr heads, lunati cam, 4:11 gears, 6spd, burnt orange color, has t bar roof, corvette wheels with new bfg gforce rubber on the rear, not quite sure the mileage, think its around 64xxx. It's my buddies car. In very good shape. Has the ss hood. I will try to dig up some pics for you, not sure if I have any.

 

[overkill131313]

how much $$??

It has an ls1 with fast intake, afr heads, lunati cam, 4:11 gears, 6spd, burnt orange color, has t bar roof, corvette wheels with new bfg gforce rubber on the rear, not quite sure the mileage, think its around 64xxx. It's my buddies car. In very good shape. Has the ss hood. I will try to dig up some pics for you, not sure if I have any.

 

[Kyle91rs]

13,500 firm

 

[Kyle91rs]

Although I'm sure cash talks. Make me an offer and I'll see what he says. It's not my car, otherwise I'd be a bit flexible with the price.

 

[Kyle91rs]

But I really need to get rid of this 355. Taking up too much space in my garage. I've got about 4 boxes of parts and spare parts to go with it. 6g takes it all. No less. If a guy had a 82-92 Camaro/firebird, this is a complete drop in turn key and go package!!

 

[Kyle91rs]

Again, the package includes :1974 Chev 350 (.030" over)Studded mainsComp X-treme energy 296/302 split duration cam and Lifters (.530 lift)Gear drive timingMoroso push rods (with girdles)Edelbrock fuel pumpEdelbrock Performer Rpm Air Gap intakeDemon 750 cfm Carbeurator7000 RPM rated performance HEITall Chevy Performance valve covers14" x 4" (i think) K & N air cleaner1967 327 (double bump) GM headsone piece 1.94" intake valves, 1.6" exhaust valves (Exhaust slightly O.S.)1.4" double valve springs1.5-1 ratio roller rockers3" Mr. Gasket HeadersAluminum pulleysChrome oil panAprox. 11-1 compression ratioPainted Dodge Daytona copper2460 hooker comp shorty headers, third gen Camaro specific2.5" custom hooker y pipe, third gen Camaro specificFuel pressure regulator, 4.5-9psi adjustableT56 6 speed Trans (97 Camaro w/26xxxkms)RAM aluminum flywheelCenterforce dual friction clutchArp bolts throughout entire engine/TransHurst short throw shifter2 x hawks crossmember for t56/Camaro swap. One for long tube headers, one for shortiesAssortment of spare pulleys, chrome accessories, spare plugsMSD plug wires with wire girdlesAutometer gauge assortment10 feet of unbent 3" exhaust pipe, 2.5" x pipe 168tooth starter, chrome153 tooth starter, used4th gen clutch pedalCarb swap throttle cableVss, reverse lockout, and reverse light clutch wiringI know there's a ton of things I'm forgetting as its all piled into boxes. This engine is literally barret-Jackson worthy. It's absolutely beautiful. Only has 30 mins of idling time since its been built.

 

[mason1000]

I have basically the same motor in my 81 Camaro z28 except it has a stroker crank a .60 over bore and some worked vortec heads and it made 528hp and 532 ft pounds at the wheels with a 750 Holley ultra. That motor will work well!! I had a 1050 dominator on mine 4:56 gears and a 150 shot of nitrous and it ran a 10:60 on drag radials!! And Kyle are you gregs brother


Sent from my iPhone using Tapatalk