800 r dual ring piston kits

POWDERSLUT

Active VIP Member
Joined
Feb 15, 2008
Messages
2,152
Reaction score
1,308
Location
Da Loops
I gotta freshin up 3 800r's ,and I'm going with the dual ring kits,any dealers or peeps got 3 of these complete kits for sale,with gaskets ,if so how much? I also got 2 mono blocks with minor scuffs ,so hoping to swap the 2 damaged ones for a replated one..
 

tnt-salvage

Active VIP Member
Joined
Mar 11, 2012
Messages
274
Reaction score
157
Location
vernon bc
i can get you these kits, spi dul ring pistons, wristpin bearings tha are caged, and gasket kit with crank seals and isofex grease. these kits sell for $499.95, i do have a brand new 800r topend from a 2010 zero miles on parts. pistons and mono cyl. was removed for 880bb. call me at 250 546 8872

also have a set of factory 800r pistons used and a set of spi dual rings used with about 400kms each set of those ill sell for $100.00 a set
gasket kits are as follows: topend $80.00, full set $145.00 dual ring pistons $170.00 each, wristing bearings $10.00 each, isoflex grease $50.00 50grams.
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,540
Reaction score
16,950
Location
DA Moose B.C
Talk to kore from here power. 800 r Mcb kits are ( last year I got one ) 345.00.

Don't like spi stuff even tho some say Mcb and spi are the same.

Have had both side by side and Mcb's are different

He will cut ya a deal for 3 I'm sure.

Stand up guy also.

sent from my htc
 

POWDERSLUT

Active VIP Member
Joined
Feb 15, 2008
Messages
2,152
Reaction score
1,308
Location
Da Loops
Ahh ...a buddy n he's a member on here ... he was tryin to sell his seld on kijiji and i noticed it so i replyed, minutes after my reply add was pulled...effn funny man..04 rev 800 144 i did just do a top end on it mid last winter for 4200$$ (dreamer)i've fixed that sled tooo many times ... he didnt even know it was me askin about it.

Ok its jayew118

hahahaha great sig.....where you get that from??
 
Last edited:

POWDERSLUT

Active VIP Member
Joined
Feb 15, 2008
Messages
2,152
Reaction score
1,308
Location
Da Loops
i see you on here rk,,,so how much for 3 kits with base and head gaskets???
 

d mills

Active VIP Member
Joined
Nov 10, 2009
Messages
3,275
Reaction score
4,982
Location
camrose
Just did mcb's in my bro's 07 couple weeks ago. Ordered off ebay. Complete kit was 335 to the door in 1.5 weeks.
 

polaris god

Member
Joined
Mar 30, 2009
Messages
15
Reaction score
21
Location
stony plain
i just finished my 07 800r... it had 2400m on it and raves blew apart into cylinder... long story short i was able to find cylinders everywhere about 600... and spi dual ring kit for 230$ on ebay... quick ship. I am dieing to go riding. we have no snow yet here... maybe valemount nov 28. good luck
 

CUSO

Active VIP Member
Joined
Jan 21, 2007
Messages
4,772
Reaction score
5,538
Location
Edmonton
I second that you talk to Kore.

MCB and SPI are from the same factory, in TAIWAN not CHINA

Different companies. MCB has dual rings, SPI has single rings.

Lots of success with MCB, I don't think you can go wrong.
 

deaner

Active VIP Member
Joined
Nov 6, 2008
Messages
3,224
Reaction score
11,178
Location
Creston, BC
Talk to kore from here power. 800 r Mcb kits are ( last year I got one ) 345.00.

Don't like spi stuff even tho some say Mcb and spi are the same.

Have had both side by side and Mcb's are different


That sounds like a good deal if they are local. I get my MCB kits off of ebay for 300 but I live on the US border so I just run across and get them. Very happy with my MCBs.
 

RK Tek

Active member
Joined
Mar 18, 2008
Messages
132
Reaction score
171
Location
Idaho
Website
www.2strokeheads.com
Talk to kore from here power. 800 r Mcb kits are ( last year I got one ) 345.00.

Don't like spi stuff even tho some say Mcb and spi are the same.

Have had both side by side and Mcb's are different


That sounds like a good deal if they are local. I get my MCB kits off of ebay for 300 but I live on the US border so I just run across and get them. Very happy with my MCBs.

Well the MCB are the same Nachmen piston The hyperdrive version.. MCB added a few oiling holes to theirs.. But they are made at the same factory as the hyperdrive pistons.. SPI also has a LOWER quality Nachmen piston that will look different and is a lesser quality piston and sold for less $$$ but the Hyperdrive pistons are their top of the line product and are the same piston, minus the oiling holes as the MCB..

Ask MCB where there pistons are manufactured and also ask them who imports them for them.. this will 100% clear it up for you
 

deaner

Active VIP Member
Joined
Nov 6, 2008
Messages
3,224
Reaction score
11,178
Location
Creston, BC
So for piece of mind.......buy a set of Kelseys magical pistons. They come with a complementary bottle of snake oil!

I have a lot of hard miles on MCB pistons. They are cheap and they work great.
 

POWDERSLUT

Active VIP Member
Joined
Feb 15, 2008
Messages
2,152
Reaction score
1,308
Location
Da Loops
PA280561.jpg
I was happy with my MCB's till i seen this,,,,
 

POWDERSLUT

Active VIP Member
Joined
Feb 15, 2008
Messages
2,152
Reaction score
1,308
Location
Da Loops
well my stocker bearings look like new and they had just under 6000 k on them,,these had 1000-1200k
 

polaris god

Member
Joined
Mar 30, 2009
Messages
15
Reaction score
21
Location
stony plain
I second that you talk to Kore.

MCB and SPI are from the same factory, in TAIWAN not CHINA

Different companies. MCB has dual rings, SPI has single rings.

Lots of success with MCB, I don't think you can go wrong.

i just installed spi dual ring???
 
Top Bottom