Clutching Info
- Thread starter jwood99
- Start date
mxz sledhead
Active VIP Member
The doo clutch are so easy to set the tra have 6 setting each setting appox
worth 200rpm so can control over rev I like my around 7800-8000 red line
on 800 c.c are about 8350rpm .They have have a small weakness govenerplate rivet work lose to rebuild them is not to hard to do a few special
tools from Doo to make job easier appox $100 .And about $400 in parts and
2hours of free time and few beers & few swear words the job done hope this
helps
worth 200rpm so can control over rev I like my around 7800-8000 red line
on 800 c.c are about 8350rpm .They have have a small weakness govenerplate rivet work lose to rebuild them is not to hard to do a few special
tools from Doo to make job easier appox $100 .And about $400 in parts and
2hours of free time and few beers & few swear words the job done hope this
helps
OVERKILL 19
Active VIP Member
I too wanted to learn clutching a-z, but the only thing U need to know is Snowmobile Clutch Kits, Dynamo Joe, mxzx revzone DJ knows more about clutching than I would care to learn, but that said I learned more from him and his site than I would out on my own. "You tube" Dynamo Joe clutch kits and he has vidios of clutch break downs etc. very helpful. his web site is full of every thing you will ever need. But one call/order and you are done.IMO
Similar threads
