- Thread starter
- #21
07 m8 aaron
Member
Just took the sled out again for the first time after tearing it down to check the reeds and power valves. I also turned the waste gate rod to lower my boost a bit. The reeds looked in great shape so I diddnt change them. Here's what I found on the test ride boost was running at 5psi and used the starting box numbers off the website and the sled pulled harder than when it was boosting 8-10psi . But I found that the power valves are sticking a bit when you give it gas and when it sticks the sled Boggs hard my cables are pretty ratty and look in rough shape . Is it possible that most of my problems are simply from the power valves not opening up because the cables are sticking ???
