doorfx
Active VIP Member
Installed an accumulator tank to quiet the RV pump down when it’s getting low.
![c9c63334904cda7e4b39440099524078.jpg](http://uploads.tapatalk-cdn.com/20200501/c9c63334904cda7e4b39440099524078.jpg)
Installed an accumulator tank to quiet the RV pump down when it’s getting low.
//uploads.tapatalk-cdn.com/20200501/c9c63334904cda7e4b39440099524078.jpg
Did you play around with pressures?I put one in my rig 3-4 yrs ago too. Helped a bit, but not as drastic as I’d hoped.
I didn't play with it much...plunked the default pressure to it (50?) and ran it.Did you play around with pressures?
If it doesn’t work that great I’ll soft line everything I can. They sell a quiet kit and it looks like it is just soft lines to isolate the pump. It’s very quiet till the tank gets below 1/3, then you can hear it.
Got my welding table almost done. What would I coat the surface with to keep from rusting but still be good ground.
//uploads.tapatalk-cdn.com/20200505/e5aeab6237eaef365abc1568b13fb0f4.jpg//uploads.tapatalk-cdn.com/20200505/62199dc11140a7c8042925115965f6ba.jpg//uploads.tapatalk-cdn.com/20200505/bff1b94fbe24e8ec14a8bb5f15a2593e.jpg
Thanks for the help guys Im being self taught on all of this. To throw a new test I bought a plazma cutter. Now just gotta rewire the garage. Compressor is on its own 220 30amp. All other plugs are 110 15amp. Tried running cutter on 110, its a pro point pro cut 30 and it does run 110 and 220. Cutting the 1/8 isnt too bad but does keep tripping breaker. Can I add another 220 some how or is this an electrician job.
Building a Cornhole game set....
//uploads.tapatalk-cdn.com/20200506/8b3f25b8267cff8bf8eb880e08f9974e.jpg