- Admin
- #1
For those that may be having some issues with there Powderlites Stage 3 turbo on there Nytro. I have some new programming that may help.
Please make sure at Idle the Fuel Pressure Regulator is at 46lbs, if not adjust it by loosening the nut on the front and turning the alan key clockwise till you get the right adjustment. The vacuum line from the regulator should go to the top of the intercooler.
You will need the software to re-program your sled. Then install the following map that is an attachment on this post. Its an mpp file if you dont have the software your computer wont understand it. With this the air fuel was between 11.2 - 12.6 and it ran great.
--> Map Removed, See updated map on next page <--
Then you connect the usb cable to you computer and to your port on your sled. No need to turn the ignition on. Double click on the Stage 3 map, then the software will open up.
Click on the Green button 5 to the right at the top (USB Connect Rapid Bike)
Then it should say Connected with Rapid Bike at the Bottom Center
Then click on MAPS INTO FLASH bar on Bottom Left
Then Click on All MAPS bar on Bottom left
Please make sure at Idle the Fuel Pressure Regulator is at 46lbs, if not adjust it by loosening the nut on the front and turning the alan key clockwise till you get the right adjustment. The vacuum line from the regulator should go to the top of the intercooler.
You will need the software to re-program your sled. Then install the following map that is an attachment on this post. Its an mpp file if you dont have the software your computer wont understand it. With this the air fuel was between 11.2 - 12.6 and it ran great.
--> Map Removed, See updated map on next page <--
Then you connect the usb cable to you computer and to your port on your sled. No need to turn the ignition on. Double click on the Stage 3 map, then the software will open up.
Click on the Green button 5 to the right at the top (USB Connect Rapid Bike)
Then it should say Connected with Rapid Bike at the Bottom Center
Then click on MAPS INTO FLASH bar on Bottom Left
Then Click on All MAPS bar on Bottom left
Last edited: