Miis, miss grind crunch

JaySimon

Active VIP Member
Joined
Mar 13, 2009
Messages
2,396
Reaction score
2,102
Location
Kimberley BC
Huckin Farley.

Looks like the steed has been having some issues. I went for a rip up the hill to the gas station, heard some crunching like a loose part floating around. Opened up the primary and didn't see anything loose or out of place, got everything buttoned up and fired it up, damn thing still has the issue. it hesitated real bad when I tried to get out on it before this happened. Not sure what the issue is, and leaving this weekend so not really keen on tearing into it myself. Looks like this may get expensive.
 

kgr

Active VIP Member
Joined
Dec 5, 2006
Messages
836
Reaction score
534
Location
L.A.
Or your drive belt sometimes it sounds real bad when there bunch cogs blown off.
 

JaySimon

Active VIP Member
Joined
Mar 13, 2009
Messages
2,396
Reaction score
2,102
Location
Kimberley BC
Hmm, never thought of that. I just replaced the thing last season, so here's to hoping that isn't it. I'll take a poke any ways. Thanks for the heads up!
 

heavy d

Active VIP Member
Joined
Dec 11, 2009
Messages
2,591
Reaction score
353
Location
Beiseker,AB
Loose compensator nut ...........they can make a bit of noise if they come loose
 

JaySimon

Active VIP Member
Joined
Mar 13, 2009
Messages
2,396
Reaction score
2,102
Location
Kimberley BC
Well, took a week to go to costa rica, and had the carb rebuilt while I was away to save me some time. Went into the primary myself and re-torqued the compensator nut and loctited that sonofab back on. She ran great, no odd sounds, just the usual ones. After all that, opted to bolt on the new pipes. Why not eh? Thanks for the help Gents.
 
Top Bottom