Sep 22, 2014 #1 T Turbormk Member Joined Nov 17, 2013 Messages 5 Reaction score 0 Location Alberta Just wondering where everyone is getting there chaincase mod done and how much it cost ? As I'm installing 7 tooth drivers and a 3" track
Just wondering where everyone is getting there chaincase mod done and how much it cost ? As I'm installing 7 tooth drivers and a 3" track
Sep 23, 2014 #2 BILTIT Active VIP Member Joined Dec 20, 2010 Messages 9,313 Reaction score 18,972 Location Lloydminster I did my own, had the welders at work weld it up after i cut it. Anyone who can weld aluminum can do it easily. I recommend you glue the case back on when re-installing. Where are you located?
I did my own, had the welders at work weld it up after i cut it. Anyone who can weld aluminum can do it easily. I recommend you glue the case back on when re-installing. Where are you located?
Sep 23, 2014 #3 Chrisco Active VIP Member Joined Mar 28, 2007 Messages 2,478 Reaction score 6,038 Location Stony Plain 300.00 for the case exchange.
Sep 23, 2014 #4 Teth-Air Active VIP Member Joined Oct 16, 2008 Messages 3,751 Reaction score 7,966 Location Calgary/Nelson Chrisco said: 300.00 for the case exchange. Click to expand... That's a no-brainer. Why would u risk it yourself.
Chrisco said: 300.00 for the case exchange. Click to expand... That's a no-brainer. Why would u risk it yourself.
Sep 25, 2014 #5 BILTIT Active VIP Member Joined Dec 20, 2010 Messages 9,313 Reaction score 18,972 Location Lloydminster Not to take anything away from chrisco but here is what it looks like for those diy's. Attachments chaincase.jpg 5 KB · Views: 217
Sep 26, 2014 #6 S skierh2o Active member Joined Oct 4, 2008 Messages 26 Reaction score 14 Location Winnipeg/Sicamous I just took mine down to a local welder who repairs boat props, and works with pretty much nothing but aluminum. He used a zip disk to cut it, ultrasonically cleaned it and then welded it up while I waited. Total time was +/- 45 min and he charged me $50 It was the deal of the winter! Skier best of luck, you'll like it!
I just took mine down to a local welder who repairs boat props, and works with pretty much nothing but aluminum. He used a zip disk to cut it, ultrasonically cleaned it and then welded it up while I waited. Total time was +/- 45 min and he charged me $50 It was the deal of the winter! Skier best of luck, you'll like it!
Sep 26, 2014 Thread starter #7 T Turbormk Member Joined Nov 17, 2013 Messages 5 Reaction score 0 Location Alberta Thanks getting it done at a local welding shop
Sep 27, 2014 #8 S skierh2o Active member Joined Oct 4, 2008 Messages 26 Reaction score 14 Location Winnipeg/Sicamous PS. got the rest of my stuff from Chrisco last winter too! Top notch service! Ryan