Chaincase mod

[Turbormk]

Just wondering where everyone is getting there chaincase mod done and how much it cost ? As I'm installing 7 tooth drivers and a 3" track

 

[BILTIT]

I did my own, had the welders at work weld it up after i cut it. Anyone who can weld aluminum can do it easily. I recommend you glue the case back on when re-installing. Where are you located?

 

[Chrisco]

300.00 for the case exchange.

 

[Teth-Air]

300.00 for the case exchange.

That's a no-brainer. Why would u risk it yourself.

 

[BILTIT]

Not to take anything away from chrisco but here is what it looks like for those diy's.

 

[skierh2o]

I just took mine down to a local welder who repairs boat props, and works with pretty much nothing but aluminum.

He used a zip disk to cut it, ultrasonically cleaned it and then welded it up while I waited.

Total time was +/- 45 min and he charged me $50

It was the deal of the winter!

Skier

best of luck, you'll like it!

 

[Turbormk]

Thanks getting it done at a local welding shop

 

[skierh2o]

PS. got the rest of my stuff from Chrisco last winter too!

Top notch service!

Ryan