850 e-start issues

rtk

Active member
Joined
Dec 8, 2007
Messages
86
Reaction score
33
Location
St Albert alberta canada
the starter motor is engaging but the new start system does not have a bendix and the splinned starter shaft engages a gear system that turns a gear on the magneto. This gear system seems to be the issue but is not listed as available for this year. 2018 that I think is the same part is $700.00. Any comments or solutions or experiences with this issue would be helpful other than spending the $700.00
 

jpmez69

Active VIP Member
Joined
Dec 9, 2010
Messages
781
Reaction score
1,574
Location
Edmonton
the starter motor is engaging but the new start system does not have a bendix and the splinned starter shaft engages a gear system that turns a gear on the magneto. This gear system seems to be the issue but is not listed as available for this year. 2018 that I think is the same part is $700.00. Any comments or solutions or experiences with this issue would be helpful other than spending the $700.00

Did you install the kit? There should be a parts breakdown on a factory Estart sled online or with the kit. Go back to you're dealer for possible warranty.
 
Last edited:

rtk

Active member
Joined
Dec 8, 2007
Messages
86
Reaction score
33
Location
St Albert alberta canada
the e-start was factory installed. i found out that the starter drive the part that is not functioning must be on the motor attached to the magnito and the engine has to be removed to replace it.
 

kimrick

RIP Fellow Sledder
Joined
Nov 28, 2009
Messages
2,236
Reaction score
6,304
Location
In Heaven & Revelstoke
the e-start was factory installed. i found out that the starter drive the part that is not functioning must be on the motor attached to the magnito and the engine has to be removed to replace it.

Pretty costly repair just for the parts onlt.

You can always just add a pull start for cheap.

Buddy did this rather than repair his e-start.
 

rtk

Active member
Joined
Dec 8, 2007
Messages
86
Reaction score
33
Location
St Albert alberta canada
already have pull start probably just put it back together and use it til spring. Dealers do not seem to know much about parts,updates or issues
 

kimrick

RIP Fellow Sledder
Joined
Nov 28, 2009
Messages
2,236
Reaction score
6,304
Location
In Heaven & Revelstoke
already have pull start probably just put it back together and use it til spring. Dealers do not seem to know much about parts,updates or issues

Sure not as simple as say the 16's and older.
Again, another change that will cost us large to fix the E-Start.
I was rather surpised when I looked up the parts list after your original post.

Thanks for oroginal information and good luck.
 

NZjosh

Active member
Joined
Dec 27, 2015
Messages
71
Reaction score
52
Location
Calgary
the starter motor is engaging but the new start system does not have a bendix and the splinned starter shaft engages a gear system that turns a gear on the magneto. This gear system seems to be the issue but is not listed as available for this year. 2018 that I think is the same part is $700.00. Any comments or solutions or experiences with this issue would be helpful other than spending the $700.00

Not sure why they are selling that one part for $700 when The complete electric start kit is $705 and includes that part (if we are talking about the same part P2 starter drive)
2fb3cbed01116beadd4245fea42fecdc.jpg
 

RGM

Active VIP Member
Joined
Nov 1, 2009
Messages
1,773
Reaction score
3,878
Location
Pemberton
I had lots of problems with the estart on my 17's On one the bolts came loose and it ended up bending the starter shaft. The other one is like yours just spins. BRP don't know how to fix it . They have some special grease but my buddy also had the same problem and the grease only worked for a while. If you don't have a pull start sometimes pulling it over on the right side helps it engage. My buddy fixed his by trading it in on a 2019 LOL
 

rtk

Active member
Joined
Dec 8, 2007
Messages
86
Reaction score
33
Location
St Albert alberta canada
I talked to a dealer and they don't know much. the starter drive was listed separately in the parts fiche online but as said is included in the kit. 2 places different info
 

jpmez69

Active VIP Member
Joined
Dec 9, 2010
Messages
781
Reaction score
1,574
Location
Edmonton
I talked to a dealer and they don't know much. the starter drive was listed separately in the parts fiche online but as said is included in the kit. 2 places different info

What dealer still uses a parts fiche?
 

rtk

Active member
Joined
Dec 8, 2007
Messages
86
Reaction score
33
Location
St Albert alberta canada
it was online but that was what he called it. There is a different online parts program on the computer from what the dealers use has different info
 
Top Bottom