Cheap alternative trailer benches

I have came up with a design for a fold down bench for an enclosed snowmobile trailer. Depending on how much you find the parts for they cost around 25-80 to build and work very well. I will post a video later today on how the work but here are a couple pictures. There is one snowmobile part used anyone recognize it?


So so basically I use 1.5" angle iron for the mounting attachment on the wall, the ctc is perfect for the studs. 1" light wall square tube to for the front leg. To keep it from slipping out when down I drilled holes through the floor and screwed big fender washers, then welded 1/4" bolts that stick through the bottom leg and go into those holes. To keep it in the storage position just use more angle iron and a tarp strap to hold it in place. The top of the snowmobile part is covered with 5/8 plywood, then wrapped with cheap indoor/outdoor carpet and carriage bolted into place. Easy to build and works great. Reason I built these I didn't like the price of anything on the market. I will post all the dimensions on the front leg and pictures of how to weld up later. Just helping out fellow sledders. Oh yeah and if you haven't guessed what part it is it comes in various lengths. Lol. Cheers.

There is a use for the skidoo stock rear bumper!

10-4. There useless for a bumper but awesome for a bench.

Looks good. I need to build a couple in my trailer this summer. Id like to build a work bench as well.

Since xm bumpers come in any length you can fit them anywhere. I have a 174,163 and 146 in my trailer.

Thank you. Brilliant

Plus you just gave me a great idea for the dry rack for my trailer . Thanks x2!!

No problem. We used these all season and never missed a beat. I waited to post it until I had enough cheap bumpers. Lol