Search results

went through same thing, found used one & it worked, Gm mech said april at the earliest, so by end of summer? just watch out for some of the crooks on kijiji, think u can use a40 or a50 tcm, used a40 worked on my 2010 when the factory was a50 tcm, good luck

if it's the reznor I am thinking of, it has an eco safety switch that if it trips it shuts off the pilot, it's prob those 2 red wires on the side of the gas valve that go to that switch, they fail a lot.

We had an arctic fox 5th wheel for three years and loved it, but we wanted a 5th wheel with bunk beds and a bunk door, we sold it privately and bought a used triple e topaz 5th wheel, from what i researched they are a quality canadian built 5th wheel. We really liked the citation corsair 5th...

Don't buy a cheap unit heater because you'll never get parts for it and they are cheap for a reason. Reznor's are good and parts easily available

they prob are the earlier weights.

I have the greaseless 18 gram overdrive weights. Just wondering if dropping to 16 gram od weights would increase the low end?

Arewethereyet would dropping down to the 16gram greaseless weights, from the 18 help with the low end? Already have the msd and 28" zillas

I am happy with the 18 gram weights and msd ecu. Easily cruise in the 70's without revving high. Can still hit over 80 km with 28" zillas. The best bang for the buck is the od weights, but the higher rev limiter and no reverse limiter make the msd worth it. I havent ran it with just the od...

Next truck you look at turn the key to the run position (without it running) and hold odometer reset button until the hours show up. Nice to see what the actual engine hours are. My 05 is 95802 km and 2251 hours. Bought it used a year ago

They are good trucks but I would try to buy one with 100k or less. These trucks are heavy and the front ends wear out early sometimes (bearings, ball joints). Don't even think about putting in a chip in the automatic unless you do some tranny upgrades as the automatics are not the most stout...

I bought this rocket launcher from full lotus. Well made and can close my tailgate with the rhino in the back. I am selling it now because I have a fifth wheel now.

Finished installing mine today on the 700 rhino. I like the results. Before my rhino would only hit 63-64 km/hr. Got it up to 80km/hr. I think it would go faster if I had a longer run. This is with heavy 26" itp 589 tires. But I also put the msd ecu at the same time. I will have to pull...

Does the fan shroud help keep the rad clean longer? I made a rad cleaner out of copper that allows you to get between oil cooler and rad. Found it on rhino forums.net.

I finally received the greaseless overdrive weights. I started taking everything apart tonight. I will finish up on friday and let u guys know how they work.

I ordered the 18 gram weights. I have 26" tires on now, but eventually I would like to put on 27 or 28" zillas.

I just ordered the overdrive weights, along with the msd ecu. Cant wait to try it out. Would the gold spring give you more bottom end? But would you lose all the top speed from your od weights?

Rapid Revolutions 780 455-7553 Edmonton

has anyone tried these on a rhino?

just curious how the zillas are doing on a utv. Has anyone had any problems? My itp 589's have over 4000km without a flat (1000km of that on a rhino), that is why I ask.

I bought 05 dodge 3500 with the cummins and couldn't be happier. Prices of used diesels seemed to drop. If you change your own oil and change your own fuel filter for $16 compared to the 100 the dealer wants, a diesel is not that much more of an expense. A gas engine will not beat a diesel in...