tightening the track on nytro xtx

[puddle]

Are there any tips or tricks to retightening the track after I change out the sliders on my 09 nytro xtx? - everything is stock. Fairly new to all service work, but would like to learn to take of my own machine.
I'm not an idiot to wrenching, just not used to it. Thanks

 

[fat tire]

you have two adjustment bollts in the back 9/16 I think, make sure you do equal rotations on each side lift the machine and see if you have* a bit of slack in the track about 1* to 1.5 inches on mine right now and it seem to be a good setup for my MTX at 153 inches.

 

[Smokey1]

Make sure is even on both sides, and loosen it off till it ratchets, then give it a turn or two.

 

[sledderdoc]

With the end lifted you can run it and make sure the track is true.