Nytro Mcx 270 test injectors

240Turbo

Active VIP Member
Joined
Nov 2, 2008
Messages
672
Reaction score
445
Location
Sherwood Park
How do you test Mcx injectors? Think one is stuck open and want to test them.
In Sicimous and in a bind.

Thanks
 

Thedoityouselfguy

Active member
Joined
Jan 15, 2013
Messages
147
Reaction score
88
Location
Westlock
I think you can test them through your onboard diagnostics....however I am not sure about your auxiliary injectors....I would give Darren a call at e and s motorcycles in the Fort. He is awesome to deal with and will know your setup. Good luck
 

darrylb

New member
Joined
Mar 2, 2013
Messages
1
Reaction score
0
Location
kelowna bc
How do you test Mcx injectors? Think one is stuck open and want to test them.
In Sicimous and in a bind.

Thanks
Haven't actually done it myself but I was told : remove injector rail and injectors, place the injectors in the rail and secure them from popping out when you put fuel pressure to them. (saftey wire ,tiny clamps whatever)put wiring and fuel lines back on to rail.
Using an air pressure regulator run the sled and put 5 to 10 lbs of pressure to the mcx box (line from intercooler)
Should be no leaks or drips with no air pressure, and an even spray from each injector when pressure is applied.
If anyone has a better plan ?? I am going to test mine before the next season.
 
Top Bottom