how to inflate fox floats

nany387

Active member
Joined
Oct 8, 2013
Messages
51
Reaction score
0
Location
mannville
I have a 2011 crossfire 800 HO and I was checking the pressure for the first time and forgot to take the weight off and they deflated I was wondering how to pump them up because I don't want to break anything could I use a bike pump also did I wreck something by accidently deflating them any ifo would help
 

fnDan

Active VIP Member
Joined
Dec 7, 2006
Messages
1,444
Reaction score
1,439
Location
Foothills
Try a mountain bike shock pump.
I believe they go as high as 150 psi. They thread on to the shock valve.
 

sled_wrangler

Active VIP Member
Joined
Jan 2, 2012
Messages
762
Reaction score
808
Location
Stony Plain
Just dont use a compressor even tho they only put out 120ish psi it will blow the seals out from what I was told

Sent from my SGH-I337M using Tapatalk
 

Modman

Active VIP Member
Joined
Mar 13, 2008
Messages
6,016
Reaction score
8,384
Location
Castlegar
Doubt you broke anything, but remember to jack it up and take the weight off next time....

There are lots of places that sell a shock pump, its basically a standard Fox shock pump, go down to the local mountain bike store and pick one up, make sure it has a small stem on it that will fit onto the fitting of the shock (there's not much room between the body and the valve so the stem needs to be small) and make sure it goes to 150 PSI. I just bought a spare one the other day for $25 bucks (Canadian).
 
Top Bottom