Boosted pro poject

[E-Zmoke]

Another Pro build, this project will be built from a 13' Pro LE and will consist of the following:

TB Wide Boards Baked Black
TB Vents - White with black screen
Headlight Delete / Cold Air Intake with LED Lights
Custom Decals and wrap
Mountain Addiction Track rack fuel jug
Avid Extended Belt Drive w C3 gears and tensioner
Avid 8tooth Extrovert drivers
Camo Extreme 162" x 3" track
Power Addiction Head
Power Addiction Turbo Domes
Boost It Turbo Kit:
-Garrett 2863 GTX turbo
-2.5 stainless steel straightpipe
-Boost-It XIC fuel controller
-Electronic boost control from XIC
-Water to air intercooler with aux fuel rail and 2 aux injectors
-Tunnel mounted heat exhanger for water to air system
-Bosch 12 volt water pump
-XIC Tmap sensor interceptor for altitude comp and low end fueling
-Yamaha Apex rising rate fuel pressure regulator
-Complete fuel line replacement with quick disconnect filter
-Turbosmart Kompact blow off valve
-Reed modification
-AEM wideband gauge
-Autometer boost gauge
-Integrated XIC/Boost/wideband gauge mount
-Sperate oil pump/lines/tank for turbo oil system
-Footwell snow vents
-Aluminum exhaust donut for pipe
-Dalton adjustable clutch weights
-Team Helix
-Primary and secondary clutch springs
-Uerathane motor mounts with stainless inserts





Fresh out of the crate


Need to make some room in the garage, first to be removed were the handgaurds


Stock Belt Drive, to be removed


Stock boards, to be removed


Vents came in


New Boards ready to install


Removing the stock boards



Zip

 

[E-Zmoke]

Removing the stock tunnel supports


Mocking up the new boards

 

[fredw]

looks sweet, was is your finished guestimate weight for this turbo sled... and whats the reason for chainging out foot rests

 

[E-Zmoke]

Boards all done, really happy with the fit and finish




Removed headlight, and stock intake



Hood feels about 8lbs lighter now

 

[maxwell]

What was wrong with the stock boards? It looks like maybe these ones are wider?

 

[Chrisco]

Are you looking for a job ????

 

[Boostmonkey]

Sweet build man.

Would like to see more of the headlight delete kit and light set up you are doing.
Also whats your plans for the stock stuff? IE the quick drive belt? Dibs on it?:d

 

[polaris011]

i wish i would have seen those boards before i bought the one i did those are a sweet cross betweent the airframes and the cr racing boards

 

[Tyson.H]

if your going to throw the bottom of the air box away ill take it pm me if u still got it

 

[sled78]

If your wanting to get rid of your stock boards pm me...thanks...can't wait to see the final product, looking good


Sent from my iPhone using Tapatalk

 

[dragonweld28]

Looks awesome, best way to spend 25 grand!!!

 

[E-Zmoke]

Sweet build man.

Would like to see more of the headlight delete kit and light set up you are doing.
Also whats your plans for the stock stuff? IE the quick drive belt? Dibs on it?:d

Belt drive is already spoken for, sorry

 

[flying frenchman]

VERY NICE. This thing should be a blast to ride.

 

[theunit1]

Looks great cant wait for more pics and updates

 

[scrfce]

whos headlight delete-cold air intake are you using? U take the hood airbox right out and the other one plumbs right into the stock engine bay airbox?

 

[Boostmonkey]

whos headlight delete-cold air intake are you using? U take the hood airbox right out and the other one plumbs right into the stock engine bay airbox?

X2 very interested in this.

 

[E-Zmoke]

whos headlight delete-cold air intake are you using? U take the hood airbox right out and the other one plumbs right into the stock engine bay airbox?

The one I will be doing will just be a vent screen in place of where the headlight goes, the lights will be mounted behind the vents. The intake will come straight off the turbo and be mounted behind where the headlight normally goes, and it will be plumbed up through the very top of the hood where the windshield normally goes sticking up about an inch or so. I won't be running the stock airbox at all.

Fire n Ice makes a headlight delete that will tie into the stock airbox Attached is the delete from Fire N Ice for those that are interested for stock airbox applications

 

[NM]

You mean like this?

 

[E-Zmoke]

EXACTLY like that Thanks Neil! See you next weekend!!

 

[E-Zmoke]