Another engine light problem after rebuild thread...

[NotoriousNRB]

i finally got the sled together and running. bled all the lines as best as i could before start up. runs and sounds great BUT immediately after start up it does THIS:



a photo if the video no worky

the manual says "SHUTDOWN" means engine overheating... but the sled hasn't run for more than 15 seconds.

if anyone has any info on this that'd be grrrrrreat. i need to get this out for a break-in ride before all the snow is gone!

i'm going to go through the connectors tonight, hopefully i'll find something.


thanks in advance

 

[maxwell]

probly the coolant temp sensor on the back of the cylinder head not plugged in correctly

 

[NotoriousNRB]

yeah i've already double checked that connection. its fine. skimmed through the other ones as well and everything looks ok. such a pain in the arse to see anything in there

 

[NotoriousNRB]

ok, so i brought it to the dealer after much frustration. i should have just done this at the beginning. Flashed/Updated the ecu and we're good to go! looks like i learned something new. if you can't figure it out, just needs a flash!