2017 King Cat

0neoldfart

Active VIP Member
Joined
Nov 22, 2008
Messages
1,385
Reaction score
2,630
Location
Thorsby
2018s will, 2017 had the body work but not chain case or narrower boards.
I bought a 2017 King Cat from T&T yesterday. It has the D&R, narrow boards & new body. The 18 has a QSL rear shock, but I bought it over the counter. Now the only difference between my 17 & an 18 is color.
 

feetsbig

Active member
Joined
Jan 17, 2009
Messages
76
Reaction score
39
Location
Heffley Creek,B.C.
So how are you guys liking the KingCat? Any seat time out on the snow yet?Sure don't hear much about them but I guess there aren't that many out there
 

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
I bought a 2017 King Cat from T&T yesterday. It has the D&R, narrow boards & new body. The 18 has a QSL rear shock, but I bought it over the counter. Now the only difference between my 17 & an 18 is color.
That orange looks awesome.
 

0neoldfart

Active VIP Member
Joined
Nov 22, 2008
Messages
1,385
Reaction score
2,630
Location
Thorsby
So how are you guys liking the KingCat? Any seat time out on the snow yet?Sure don't hear much about them but I guess there aren't that many out there
Got a chance to take it out for a few days, still dealing in the suspension. Love the power, & handling. Big improvement chassis wise vs. a stock 1100T Suzuki, & it will get better once the suspension is dialled in to suit me.
 

0neoldfart

Active VIP Member
Joined
Nov 22, 2008
Messages
1,385
Reaction score
2,630
Location
Thorsby
I guess I'll add a bit more of a review on the 2017 King Cat. After coming off sleds with custom (Kmod) suspension, the stock skid works better then anything Cat has had previously. But I'm installing a Kmod under the King Cat, as I'm old and like the ride. Handling is far better then a stock M1100T, comparable to my 1100 that has had 90 lbs of weight reduction, Kmod skid, Exit shocks and a 16 front end, among a ton of other stuff.
Fit and finish is far better then previous Cats, the Team clutching works very well out of the box, belt is still holding up. I've done a few things to the sled to make it "mine", but make no mistake, it is the best 4S I've ridden out of the crate. I've added the following:
- B&M Fabrications "skinny" boards with billet traction blocks
- EVO Stage 4 reflash with bullet muffler, BOV, and silicone charge tubes
- Thunder Products 911 cover and adjustable weights, glide washers
- Delrin washers in secondary
- Cat accessory front and rear bumpers
- Polaris Gripper skis
- Taller riser
- Mtn Addiction fuel can and bag
- Mtn windscreen (is actually a bag)
- Handlebar bag
- Skid plate
- And will be installing a Kmod Gen 2 suspension with my own spring calibrations. I think that is all this sled will ever need. Bear in mind I normally ride a 285hp 4S that works really well, and weighs about 80 lbs more then my M800 S/P Ltd 162". So the King Cat / Sidewinder is a winner in my eyes.
 
Top Bottom