2011X etec service engine light stays on and the engine runs great.

springer

Active member
Joined
Nov 28, 2010
Messages
75
Reaction score
12
Location
alberta
Disconnected battery and check engine light still stays on. Engine runs great
 

hdkawi

Active VIP Member
Joined
May 9, 2009
Messages
741
Reaction score
450
Location
sherwoodpark
did it have a starter when it was new? does reverse still work?do hand warmers also work?
 

springer

Active member
Joined
Nov 28, 2010
Messages
75
Reaction score
12
Location
alberta
electric start with spring order. everything works, taking it in to dealer to-day. will post updates
 

mudpro9

Member
Joined
Feb 27, 2012
Messages
8
Reaction score
0
Location
Regina
A friends sled did something like that it was a high amp draw code I think. Something about the headlight switch getting bumped and the high and low beams being on.
 

springer

Active member
Joined
Nov 28, 2010
Messages
75
Reaction score
12
Location
alberta
the problem was the sensor that threads into the front exhaust pipe was no longer working. 485 dollars later back on the sled. they did not warranty the sensor reason is that it is not part of inginition or engine
 

Winter Brew

Active VIP Member
Joined
Feb 18, 2009
Messages
228
Reaction score
247
Location
Lake Tapps, Wa
Did you check for stored codes? The 11 was notorious for the overvoltage code from the headlight hi/lo switch getting bumped. If this is the code, moving the switch to the riser block eliminated the problem for me.....or wherever it wont get bumped all the time.
 
Top Bottom