Skidoo shock rebuild

oler1234

Active VIP Member
Joined
Nov 20, 2008
Messages
3,633
Reaction score
6,167
Location
Calgary, AB & Golden, BC
Thought I’d upload some photos of shock rebuilds for skidoo model. This applied to 2008-2024 for the most part. That said these are the KYB HPG shock or better. I have included exper and c-36 rear.

Overall these shocks are really good I feel. Steel piston and piston head. Ice scrapper is better than a elka in my opinion. 36mm body diameter for all models except KYB-40, which is 44mm. There is a comparison of a 2008 summit x shock to a expert model shock

Problems from factory is there only 70-80% full of fluid. Charge pressures vary from 200-250psi. Fluid is complete garbage and is clapped out at 1000-1500km for a intermediate rider. Advanced/aggressive rider would be a lot less. Whooped out trails, a lot less. Notice the picture of the piston with burnt fluid adhearing to it, not ideal.

A simple brake down, fresh quality fluid, and good charge is what these really need and there good for 2 seasons of aggressive rider in general.

If anyone needs some help with rebuilding, let me know.
 

Attachments

  • 14E4308E-1E53-499B-A6CF-3BEBE1754A70.jpeg
    14E4308E-1E53-499B-A6CF-3BEBE1754A70.jpeg
    314.7 KB · Views: 82
  • 98ACFD36-825A-4225-B3CE-FB179B65C583.jpeg
    98ACFD36-825A-4225-B3CE-FB179B65C583.jpeg
    342 KB · Views: 78
  • A21C1013-231F-4EBF-927B-AC67780507F3.jpeg
    A21C1013-231F-4EBF-927B-AC67780507F3.jpeg
    188.9 KB · Views: 75
  • E6C61E1D-F38E-43B8-83BB-220CCBA1200A.jpeg
    E6C61E1D-F38E-43B8-83BB-220CCBA1200A.jpeg
    227.8 KB · Views: 70
  • 9752FF20-1418-4297-A67A-D94F926DA440.jpeg
    9752FF20-1418-4297-A67A-D94F926DA440.jpeg
    231.8 KB · Views: 80
  • 60C9BE88-F706-4CC9-B7BE-2DBE5FA3AA94.jpeg
    60C9BE88-F706-4CC9-B7BE-2DBE5FA3AA94.jpeg
    314.6 KB · Views: 73
  • A429BF99-CEB3-465A-A409-64F49B3256E6.jpeg
    A429BF99-CEB3-465A-A409-64F49B3256E6.jpeg
    197.1 KB · Views: 71
  • 4B31EB5E-444C-4F11-82B0-52011ACD8288.jpeg
    4B31EB5E-444C-4F11-82B0-52011ACD8288.jpeg
    188.2 KB · Views: 75
  • A1340935-D638-4D39-94FA-5D21EDE86EB9.jpeg
    A1340935-D638-4D39-94FA-5D21EDE86EB9.jpeg
    184.6 KB · Views: 74
  • DD25D4D0-4071-4FCA-B8A7-8CEB4E4537E2.jpeg
    DD25D4D0-4071-4FCA-B8A7-8CEB4E4537E2.jpeg
    438 KB · Views: 77
  • E0670144-B277-4F07-A9A4-F34C44C96540.jpeg
    E0670144-B277-4F07-A9A4-F34C44C96540.jpeg
    400.1 KB · Views: 74

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,274
Reaction score
12,627
Location
Edmonton
What fluid did you use? is there "weight" to the shock oils? I have so many questions lol
 

oler1234

Active VIP Member
Joined
Nov 20, 2008
Messages
3,633
Reaction score
6,167
Location
Calgary, AB & Golden, BC
What fluid did you use? is there "weight" to the shock oils? I have so many questions lol

Depends on shock position and rider. But typically 2.5, 5, 7, and 10wt.

Normally I use redline or Amsoil. it is the most linear performance from cold off the truck to warm Summer performance.


Some oils look good on paper but there viscosity’s just don’t work at colder temps. Meaning even though your buying a 5wt it reacts like a 15wt at -10
 
Top Bottom