Electrical connections help and advice

b_doornenbal

Active VIP Member
Joined
Jul 1, 2008
Messages
254
Reaction score
314
Location
Spruce Grove
I was cleaning my sled for winter storage and found I had a loose wire on the connection for the fuel pump on a 2009 M8. Attached are the pics and the only info I can see on the connection is P.E.D 51 and the letters A and B.

Can I just get new terminals?? Do I need to replace the whole plug both male and female?

Any Advice or place to buy these would be great.
 

Attachments

  • image.jpeg
    image.jpeg
    107.7 KB · Views: 73
  • image2.jpg
    image2.jpg
    70.3 KB · Views: 75
  • image3.jpg
    image3.jpg
    80.5 KB · Views: 70

magnet

Active VIP Member
Joined
Apr 29, 2008
Messages
5,364
Reaction score
1,391
Location
GSBA
you can get new terminals the same a those but probably a bit of a pain. i would just replace both ends with a weatherpack connector, cheap, and easy to get. and seal just as good imo.
of course that all depends on the accesability of the other end of the connection.
 
Top Bottom