4byrookie
Active VIP Member
Just finished the snorkels on my 750 Brute. Hopefully no more steam stall or sucking in water when hitting water holes. Also next week getting my Highlifter triple core rad and no more overheating(hahaha)
08 Brute snorkels
- Thread starter 4byrookie
- Start date
plumbum
Active VIP Member
nice! is that custom dirt and grass etc... i see too.lol
- Thread starter
- #3
4byrookie
Active VIP Member
Yah, I cleaned the main unit when I took all the body parts off but never did clean the fenders and such.(oops) Might remember to clen a bit better when I put in my HL rad next week.
All the stringy stuff is just baler twine that I used to tie things in place while I sized everything
cey800
Active VIP Member
- Joined
- Nov 12, 2006
- Messages
- 451
- Reaction score
- 7
Looks good...I've seen alot of add ons and accessories, but a hair dryer?....lol.........let me guess, turbo from ebay
?
?- Thread starter
- #5
4byrookie
Active VIP Member
Looks good...I've seen alot of add ons and accessories, but a hair dryer?....lol.........let me guess, turbo from ebay
I needed to heat the couplings to get them to fit on my CVT exhaust and on my airbox intake and forgot I had it on the back when I took the pics.
Your not supposed to be looking at the stuff in the background.LOL
The turbos from ebay only come in black.LOL
cey800
Active VIP Member
- Joined
- Nov 12, 2006
- Messages
- 451
- Reaction score
- 7
Let us know how it runs.
plumbum
Active VIP Member
damn i didnt even notice the turbo.lol. i think i have 4 or 5 turbo's between my wife and girls. hhhmmmmm.... maybe i can make that rubicon faster yet.
cey800
Active VIP Member
- Joined
- Nov 12, 2006
- Messages
- 451
- Reaction score
- 7
A 12V inverter and your set!
muddy brute
Member
leonard
Active VIP Member
you see all that mud.. if its on the rad it cant be there .. or you over heat. even with a HL rad it will Overheat with mud .. just less chance of it going through the mud.
lol im playin around with ya btw.
lol im playin around with ya btw.
- Thread starter
- #11
4byrookie
Active VIP Member
A few guys I have ridden with have the Highlifter rads in the stock location and have gone riding with the rad caked in mud to start with and never had problems with heat riding hard on hot days. I still don't have mine yet, it is supposed to be in this week but the way it is looking I won't be able to ride untill mid Sept. cause of that stupid work thing
. Wish I could get paid to quad all day:d
But like I said everyone I know and hear of that has the HL rad stock or rack mounted has no heat issues.
Muddy Brute, which hand gaurds are those on your quad? Do you have any issues with your diff lever with them on? Would like to get some but don't want to spend the money then find out they wont go on the way I want.
. Wish I could get paid to quad all day:dBut like I said everyone I know and hear of that has the HL rad stock or rack mounted has no heat issues.
Muddy Brute, which hand gaurds are those on your quad? Do you have any issues with your diff lever with them on? Would like to get some but don't want to spend the money then find out they wont go on the way I want.
muddy brute
Member
they are moose you have to cut the rubber to get then to fit right. I bent my leaver in a little and it works fine. i don't use my diff lock that much and i have the pin in my 650 brute so it stay locked
mudbitchguy
Active member
Looks good Mike... I'm thinking on snorkeling my Grizz... BTW my HL triple core rad is awesome... Well worth the money!!
BIG_BRUTE750
Active VIP Member
the power madd hand gaurds work good.
- Thread starter
- #15
4byrookie
Active VIP Member
I have my HL triple core installed and ready to go but can't get out until next weekend to test it out. I was surprised how easy it was to put in. Now all I have left is to get a map built for my powercommander.
mudbitchguy
Active member
We should plan another outing @ our secret spot!!
- Thread starter
- #17
4byrookie
Active VIP Member
I am free next weekend and probably the next few after that as well. Going to the Braz rally on the 20th other than that no other plans until holidays at the end of the month. Just let me know and I will work on being there. Maybe even get through the first hole without busting the 2 winches this time
mudbitchguy
Active member
I am free next weekend and probably the next few after that as well. Going to the Braz rally on the 20th other than that no other plans until holidays at the end of the month. Just let me know and I will work on being there. Maybe even get through the first hole without busting the 2 winches this time
I'll let you know what I can make happen!!
- Thread starter
- #20
4byrookie
Active VIP Member
I tried using all PVC but where the dealership mounted my winch selenoid made it impossible to run the CVT exhaust so I went to the flexible hose to make it work. Have not had any problems yet.
Similar threads
