Search results

i found this on snow west, i know these are not all 2013 weights but i bet its not that much different. these weights are everything full of fluids, oil, antifreeze...everything, except all fuel tanks are drained and completely empty 2013 PRO 155" 438 lbs 2012 PRO 155" 454 lbs 2012 M8 153" 496...

Thought i would throw this out there and see if anyone has any knowledge in this area, I have a 2013 163 Pro Limited and would like to change the drivers to put on a 3" pitch powder claw 2.6" lug anyone have any ideas on this? btw that would leave my brand new 163" track for sale. Thanks in...

I think everyone forgets how difficult it is to put a can on a cat 800 and not lose HP I have a buddy running a box stock proclimb and another running a jaws can. Its simply remarkable how much stronger the stocker is compared to the one with the Jaws can. most cans you will lose HP with the...

I like the stock height would you build one stock height?

I will post some tomorrow, I simply went straight out the elbow of the turbo with a 2" ABS plumbing pipe cut a hole in the hood and run a Uni-Filter cage with a boondocker prefilter over the cage. Turbo chatter is VERY loud, but I like it! reminds me of my TApex! Just remember to take out the...

I was running 220hp on pump for a while no codes, turned it down to 200hp mark, still runs REALLY strong there, why chance it....60-70mph track speed while climbing is good enough for my sorry carcas!

I have my 1100t setup and working perfectlyHad the chip set at 200hp (old style EZ Jacker) didnt need the chip set any higher!MBRP canTook the stock air box cover off of the hood and ran the intake straight out the hood, comes out beside headight.Heat now pours out the top of the hood (through...

I installed a Cutler stage 3 on my 2009 M8, cant say enough about CPC, Dale and his crew were VERY helpful andHighly recommend thier kits!for the M series, i would only buy CPC, with twisted a close second :)

I checked out dynotechs website and the power is very broad 7300RPM was max torque I have installed a chip on mine going to weight heaviliy 95g in the primary hopefully run around the 7500rpm at 220hp and when i hit the button and add 20hp, still have lots of clutching this thing will be wicked...

Silly goose!Everybody knows Cat had the pro first! Started i believe in 2003Sno Pro ring a bell!

I put a stage 3 cutler kit on my 2009 M8, i run the OVS wheelie kit, stops the rear scissor from collapsing...works very well. I also have a 1100t and certainly going to run the wheelie kit

had a friend of mine rode the BONE stock 1100T up the hill, I rode it and here were my impressions HANDLEBARS, HANDLEBARS, HANDLEBARS!!!!!!!!! I am 6ft tall and the bars are at least 2" + too low it really makes me wonder why Cat didnt make the sled with the adjustable bars like the m8! my knees...

food for thought here people, the meetings and studies that are done by goverment funded (aka, we the people). Im sure have to be public knowledge, so somewhere somehow we need too get a hold of these documents and go over them.. I think its about time that the guilty government parties have to...

the can from the 2009 will not fit the 2011, completely different pipe be careful with putting a can on your new sled, do your research, I was told if you put a can on the new motors on the 2010 and 11s you will loose HP Talk to Dale Cutler at CPC, he has a can that equals factory HP on top end...

I too have a 2011 OVS turbo...propane turbo though, contact Tyler or OVS they have a wheelie kit for the stock skids...works great! B

Patty! any reports on getting to the back in Parr berry? can you get there no prob?

I have put in a timbersled skid with Float x shocks Love it.. its squats like a vette pokes the skis up about 12" climbs on top of the snow and launches hard... Rides like a dream Set up perfectly for 12lbs of CPC boost

BTW im a constant lurker of your threads as well, thanks for all the very informative info! B

Patty....has anyone been into Parrberry yet? B

I have a 2009 SLP can, dont need it anymore, replaced the can with a hair dryer!sure its no different than the 2008, can has 800 miles $100 Sherwood Park 780-919-1644 texts only please as I am out of the country working until the 27th or email at tacnrg@telus.net