WeldCraft Jet

gunner3006 · Apr 18, 2019

So the welder took a stab at the impeller today.

Not the easiest but turned out pretty good for something I was gonna toss.

NoBrakes! · Apr 19, 2019

nice work

pfi572 · Apr 19, 2019

gunner3006 said:
So the welder took a stab at the impeller today. View attachment 216933 View attachment 216934

Not the easiest but turned out pretty good for something I was gonna toss.

Stick in lathe and touch it up . Good as new .

gunner3006 · Apr 19, 2019

That’s what I was thinking

NoBrakes! · Apr 19, 2019

Are you going to look for a new A? Another thought if you have access to a lathe, would be to get a AA and then you can always cut if it's too low RPM. and have that B for a high speed spare.

gunner3006 · Apr 19, 2019

NoBrakes! said:
Are you going to look for a new A? Another thought if you have access to a lathe, would be to get a AA and then you can always cut if it's too low RPM. and have that B for a high speed spare.

I’m going to buy a new A. Working on a bottom right now. Been talking with Jamie at highcaliber all week. Thought about going with aluminum bottom and keel strip but the price is ridiculous.

Stg2Suby · Apr 19, 2019

Just curious would that impeller need to be balanced after weld buildup and repair? Or are they small enough that it doesn't matter

gunner3006 · Apr 19, 2019

Stg2Suby said:
Just curious would that impeller need to be balanced after weld buildup and repair? Or are they small enough that it doesn't matter

It’s small enough that it’s not going to matter. There were too pieces the size of dimes that were replaced. Stainless may be a different story. The used stainless B I have right now weighs twice as much maybe more.

Stg2Suby · Apr 19, 2019

Its and interesting thread to me as someone with zero boating experience. Amazing that much torque/hp can be efficiently converted to thrust though that little impeller.

gunner3006 · Apr 19, 2019

Stg2Suby said:
Its and interesting thread to me as someone with zero boating experience. Amazing that much torque/hp can be efficiently converted to thrust though that little impeller.

One thing I will say is working on a pump is a lot easier than working on a outboard leg.

pfi572 · Apr 19, 2019

I will look as I think I might have a A impeller you can try ?

gunner3006 · Apr 19, 2019

pfi572 said:
I will look as I think I might have a A impeller you can try ?

You bet. Either way let me know.

pfi572 · Apr 19, 2019

gunner3006 said:
You bet. Either way let me know.

It’s a AA but you could cut it down.

gunner3006 · Apr 19, 2019

pfi572 said:
//uploads.tapatalk-cdn.com/20190419/e1ed1c6476d83f074ad6c86e534ae2b8.jpg
//uploads.tapatalk-cdn.com/20190419/c7b7857b949f982541b9af6afac4285c.jpg //uploads.tapatalk-cdn.com/20190419/670103e93216307c6f35d0c71a542809.jpg

It’s a AA but you could cut it down.

I sent ya a pm thanks

gunner3006 · Apr 27, 2019

Well I got the AA impeller on. Just waiting to test it out now. See what it does. Thinking it’s probably getting cut back to an A though. Thanks Ross.

NoBrakes! · Apr 29, 2019

If you're not looking for speed, its nice to run a big wheel and keep RPMs down. Might even be better on the motor and put it in peak torque range

gunner3006 · May 9, 2019

Hey guys. So I got out on the river last night and tried out the AA impeller. Wow. Totally different boat. Wholeshot was way better and I could cruise down to 3150 and stay on step. Really impressed with it now. That’s with 4 guys in the boat. Hooked on the jet boat. It was such a nice evening on the water.

NoBrakes! · May 10, 2019

make sure you're out Wednesday July 17 and Thursday the 18th bright and early to watch the race boats
from the bank!

Obrien park to Wapiti gardens and back Wednesday

Obrien park to Mcloed flats and back Thursday

neilsleder · May 10, 2019

NoBrakes! said:
make sure you're out Wednesday July 17 and Thursday the 18th bright and early to watch the race boats
from the bank!

Obrien park to Wapiti gardens and back Wednesday

Obrien park to Mcloed flats and back Thursday

I would like to come watch that!

NoBrakes! · May 10, 2019

Whitecourt July 12,13, Peace River July 14,15, Grande Prairie July 17,18 then Taylor BC July 20,21 and a real shindig at the end!

WeldCraft Jet

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Similar threads