I've got a 2008 Nytro Turbo.
Ran great last year.
I pulled it out of garage today, and no power nothing!
Today i tried starting it and has no power to gauges, nothing.
Checked the battery 12.7v
Checked power to starter solenoid 12.7v.
Using a screw driver i jumped the starter solenoid, starter engaged, engine turned over but engine would not start. Will the key "on"
Yes the kill switch is on
I checked the fuses behind the brake caliper, which are all good, also checked fuses on solenoid which are also good.
Next to no corrosion on starter solenoid.
Checked all plugs, ignition switch, all plugs and everything was clean.
I'm out of options, would the engine start if the key was in the "on" position which jumping the starter solenoid?
I went ahead and ordered a new starter solenoid just in case.
Ran great last year.
I pulled it out of garage today, and no power nothing!
Today i tried starting it and has no power to gauges, nothing.
Checked the battery 12.7v
Checked power to starter solenoid 12.7v.
Using a screw driver i jumped the starter solenoid, starter engaged, engine turned over but engine would not start. Will the key "on"
Yes the kill switch is on
I checked the fuses behind the brake caliper, which are all good, also checked fuses on solenoid which are also good.
Next to no corrosion on starter solenoid.
Checked all plugs, ignition switch, all plugs and everything was clean.
I'm out of options, would the engine start if the key was in the "on" position which jumping the starter solenoid?
I went ahead and ordered a new starter solenoid just in case.