snow plow mounting attachment.

fidorama

Active VIP Member
Joined
Dec 3, 2013
Messages
343
Reaction score
336
Location
leduc county
Website
www.geocaching.com
Hi,
I recently picked up a used pro shovel snow plow, but the guy I bought it from did not have the attachment hardware. I am guessing there is some sort of plate for under the frame as well as something to the hitch point.
I have tried looking up and contacting the manufacture but have had no luck there. It almost appears the manufactures name may have changed at some point. It appear very similar to a snow bear model, but I have not been able to find any info on the pieces I am missing.
Any ideas? or does anyone have a similar type of plow with the hardware that they could maybe send me a picture of? I may end up having to just have the parts fabricated, but it would help to at least have an image of what it should look like. Might make this a bit easier.
Thanks
 

SavageCanuck

Active VIP Member
Joined
May 25, 2009
Messages
687
Reaction score
536
Location
Kelowna
I have never heard of that model you will probably have to fab something.I have the warn vantage and when I went from a 700 grizzly to a Gen1 canam I was able to just order the specific mount plate .The cost was around $75
 
Top Bottom