Oct 31, 2014 #1 D Drewmitch Member Joined Oct 26, 2014 Messages 10 Reaction score 0 Location Winnipeg Hey was wondering how guys are getting side pannels off to do vent kits, does the pivot point break or how does it come off ?
Hey was wondering how guys are getting side pannels off to do vent kits, does the pivot point break or how does it come off ?
Oct 31, 2014 #2 Rjjtcross8 Active VIP Member Joined Dec 7, 2011 Messages 886 Reaction score 906 Location Bruderheim If you look at the pivot you will see a bolt in the footwell area. You will need a t27 torx bit to undo it.
If you look at the pivot you will see a bolt in the footwell area. You will need a t27 torx bit to undo it.
Oct 31, 2014 #3 CatMan16 Active VIP Member Joined Nov 25, 2007 Messages 1,185 Reaction score 1,832 Location Red Deer There is usually a clip on the inside of the pivot remove that then it pulls out of the rubber mount. Sent from my iPad using Tapatalk
There is usually a clip on the inside of the pivot remove that then it pulls out of the rubber mount. Sent from my iPad using Tapatalk
Oct 31, 2014 #4 medler I love guns Joined Aug 6, 2007 Messages 17,637 Reaction score 8,120 Location Stettler Alberta I didn't take mine off. Just flip them up and use a hole saw for drilling