replacement track for T3

Summitizer

Active VIP Member
Joined
Dec 8, 2009
Messages
156
Reaction score
207
Location
Hinterland
Does anyone know if there is a 2.5 inch track that will fit on the 2015 163 t3 without a driver change.....thanks.
 

King

Active member
Joined
Nov 10, 2008
Messages
75
Reaction score
16
Location
Edmonton, Alta.
If you don't mind me asking why are you going from a 3" back down to a 2.5"?
I have been kicking around putting a 3" on my 2013 163 but haven't decided if it is worth it.
 

Summitizer

Active VIP Member
Joined
Dec 8, 2009
Messages
156
Reaction score
207
Location
Hinterland
I'm finding i ride more at home then in the deep. the 3 inch is just overall too much track for trail riding. it is mountain specific and i think the 2.5 would be a good compromise.
 

pfi572

Active VIP Member
Joined
Mar 10, 2010
Messages
6,064
Reaction score
15,264
Location
Grande Prairie
2.5 is a far better all around track.
Could cut the 3 inch down also ? Only takes a few minutes.
I thing 2.8 - 2.7 inch would be perfect.
 

pfi572

Active VIP Member
Joined
Mar 10, 2010
Messages
6,064
Reaction score
15,264
Location
Grande Prairie
how would you cut it.

I bought a set of shears at Canadian tire years ago for cutting the lugs down.
They have a replaceable razor type blade on one side like a exacto blade knife.
I will take a pic of tool.
Works awesome.
 
Last edited:

Ianbouvier

New member
Joined
Dec 11, 2016
Messages
2
Reaction score
0
Location
Alberta
Before you go cut your track let me know. I'll swap you track and drivers. I have a 154 2.5"


Sent from my iPhone using Tapatalk
 
Top Bottom