yellow jacket
Member
I am looking for a DJ kit with ramps for my 09 xp 163, how do I get a hold of you ?
Dynamo Joe CLutch Kit
- Thread starter doostylz
- Start date
drop the hammer
Active member
If needing ramps/kits, i've got them in Airdrie. Email address in my sig.
EGG-3
New member
Where can you find a complete set for a 08 xp 800r 154" in Eastern Idaho and what is the set up for elevations of 6000'-9500'?
Thank you.
Thank you.
zeeberg7
Active member
I would e-mail Brad @ brad.cadieux@shaw.ca (Drop the Hammer on snow and Mud). this is where I got my kit from. The instructions in the kit will tell you what to run your weight at. I would think that 15.3g would be great for that kind of elevation. as I have 15.9 on mine and it is running perfectly strong between 5000 and 8500ft.
Talk to Dynamoe Joe and just order his kit... or like said order from someone on here.
Boost Monster
Active member
Just my DJ clutch for my 08 XP from Ryan @ General Auto in Lamont, AB. (780) 895-7446. Also got DJ's Ramps. Ryan has got Lot's of DJ Ramps and XP kits in stock. Great guy to deal with and prices are awsome.
Metalfusion
Active VIP Member
Where abouts is this shop located. I dont recall ever seeing it and it would be nice to have a place in town to go to for some needs.
EMANAARON
Active VIP Member
I have a 09 Renegade all setup for the Mountains with a 141x2.25x15 Track on it Geared 23/45. Pulling hills in the Powder in Clemina i have an average track speed of 90-100Kmh with this setup. Looking to get a little More.
Just wondering is there a DJ kit for this and will this work or will it be overkill with such a small track ?
Just wondering is there a DJ kit for this and will this work or will it be overkill with such a small track ?
maxwell
Active VIP Member
the kit can be adapted for anything. do this.
EMANAARON
Active VIP Member
Will it be over kill with the recomended weight and just over rev or would i need to add some heavier weighs
08 800 x doo
Active member
Sorry but i am some troubles with my sled those ramps they were joes & 441 or 415
i put 441 in my XP with the D.J. & i cann't hold the RPMS on the flat land any info would be nice
i put 441 in my XP with the D.J. & i cann't hold the RPMS on the flat land any info would be nice
08 800 x doo
Active member
Sorry about the last words i must have been half asleep
Here is what is happening i have the 441 ramps in my 08 xp 154 QR11 joes prime spring & the solid pins i am running 15.9 grams at 2300 feet it will hit 8250 8300 & then backs off to 8000 on clicker # 3
I had it to the mountions on clicker # 4 & it was turning 8200 too 8300 then it wouldback off to 8000 i didn't pay with it i was having to much fun
So my question if i put in joes ramps will i be able to tune the sled for the hills & the flat land with out adding weight or taking it out i already bought the 441 ramps & they are in it but i will buy joes ramps if they are a better set up for all around riding & i see that they do work better in the hills BOYS I NEED SOME INF0 PLEASE
Here is what is happening i have the 441 ramps in my 08 xp 154 QR11 joes prime spring & the solid pins i am running 15.9 grams at 2300 feet it will hit 8250 8300 & then backs off to 8000 on clicker # 3
I had it to the mountions on clicker # 4 & it was turning 8200 too 8300 then it wouldback off to 8000 i didn't pay with it i was having to much fun
So my question if i put in joes ramps will i be able to tune the sled for the hills & the flat land with out adding weight or taking it out i already bought the 441 ramps & they are in it but i will buy joes ramps if they are a better set up for all around riding & i see that they do work better in the hills BOYS I NEED SOME INF0 PLEASE
08 800 x doo
Active member
Sorry about the last words i must have been half asleep
Here is what is happening i have the 441 ramps in my 08 xp 154 QR11 joes prime spring & the solid pins i am running 15.9 grams at 2300 feet it will hit 8250 8300 & then backs off to 8000 on clicker # 3
I had it to the mountions on clicker # 4 & it was turning 8200 too 8300 then it wouldback off to 8000 i didn't pay with it i was having to much fun
So my question if i put in joes ramps will i be able to tune the sled for the hills & the flat land with out adding weight or taking it out i already bought the 441 ramps & they are in it but i will buy joes ramps if they are a better set up for all around riding & i see that they do work better in the hills BOYS I NEED SOME INF0 PLEASE
Here is what is happening i have the 441 ramps in my 08 xp 154 QR11 joes prime spring & the solid pins i am running 15.9 grams at 2300 feet it will hit 8250 8300 & then backs off to 8000 on clicker # 3
I had it to the mountions on clicker # 4 & it was turning 8200 too 8300 then it wouldback off to 8000 i didn't pay with it i was having to much fun
So my question if i put in joes ramps will i be able to tune the sled for the hills & the flat land with out adding weight or taking it out i already bought the 441 ramps & they are in it but i will buy joes ramps if they are a better set up for all around riding & i see that they do work better in the hills BOYS I NEED SOME INF0 PLEASE
giddyup
Active VIP Member
no expert by no means, but i would check your primary spring and i would go up on the finish rate, so if you are running a 160/320 common spring on the xp i would go to a 160/350 i think it would help hold the rpms, just a thought there are many people far smarter that i am but it just a thought good luck, im just waiting for my ramps from joey to come in hope mon or tues i should have them
good luck
giddyup
good luck
giddyup
08 800 x doo
Active member
Is there any one that sells joes ramp in northeren albeta if there is i need a set let me know
Like north of edmonton
Like north of edmonton
Crash
Active member
Ryan @ Lamont General Auto. North East of Edmonton.
Here is my setup on my 09 xp 154, QR11 helix with 160/350 primary spring, pins are 15.3 grams and I'm using joe's ramps. This combo works at home-3500 ft and in the mountains. Also running a 20 tooth top sprocket in the chaincase.
Last edited:
prairie-rider800
Active VIP Member
I'm looking into getting one of these dj kits for my 02 summit. I was looking on the website and it says he makes a low elevation kit and a high elevation kit. If I get one of the low elevation kits for at home, will still work if I go to the mountains?
thanks
thanks
revved up
New member
i could take the time to explain it but its better to just call joe and hear it from him and he will tell you about his different setups. he's 100% honest and not trying to sell u anything he doesn't have to. i have dealt with him lots lately and he is extremely knowledgable and great to deal with. his number is 1-807-346-9701
revved up
New member
it will work as long as you still can turn up you clickers up enough to compensate for altitude or you can set up your weight so you have a big enough clicker range. his high altitude kit is for max performance at altitude and his low altitude is for max performance at low elevation but either will work in high or low altitude as long as you can adjust your clickers enough. buy the kit for the altitude you will ride at most. you wont be disappointed, he makes a great kit.
Similar threads
