4x4

Bryan

Active member
Joined
Aug 20, 2007
Messages
74
Reaction score
0
Location
Spruce Grove
Hello all. I have been out quading every weekend since the May long. Enjoying every minute. My Honda 500s just doesnt have enough for me anymore, any suggestions? without replacing it.
 

Murminator

Timber King
Moderator
Joined
May 22, 2007
Messages
5,615
Reaction score
2,498
Location
NE Edmonton
Locker, tough to go through mud with a peg leg (3 wheel drive) as for more power it would prolly be easier and cheaper to upgrade

Oh and welcome to the club
 

Mtn-guy

Active VIP Member
Joined
Dec 11, 2006
Messages
168
Reaction score
4
Location
Sherwood Park
I just bought two grizzley 700's and they seem good so far.

Murminator what tires do you have on yours? They look good and I am going to get some later this week.
 

Murminator

Timber King
Moderator
Joined
May 22, 2007
Messages
5,615
Reaction score
2,498
Location
NE Edmonton
Mud lites 26X10X12 and 26X12X12 cheapest place in town with install was rapid revolutions talk to Kevin
 

Bryan

Active member
Joined
Aug 20, 2007
Messages
74
Reaction score
0
Location
Spruce Grove
i am going on a rally soon in Sask, Ill give this Honda one more chance to impress. Im thinking my mud lights are a little to aggressive for the 500
 

Murminator

Timber King
Moderator
Joined
May 22, 2007
Messages
5,615
Reaction score
2,498
Location
NE Edmonton
My buddy had 26" mud lites on his 450 ES was almost perfect unlike an automatic where you bog out with to big of tires you can set what gear you want to keep up the wheel speed :D
 

brianwmcdonald

Active member
Joined
Jun 8, 2007
Messages
107
Reaction score
10
Location
Leduc
i am going on a rally soon in Sask, Ill give this Honda one more chance to impress. Im thinking my mud lights are a little to aggressive for the 500


I have a Honda Rubicon 500 with 26" Mud Lites and have had no problems. I do find sometimes it's best to put it in low range and ESP stay in 1st and 2nd gear, you can usually rip through anything then. I also have a buddy with the foreman 500 with 27's on his and he has no issues.
 

Bryan

Active member
Joined
Aug 20, 2007
Messages
74
Reaction score
0
Location
Spruce Grove
what i am finding is the range between 1st and 2nd gear is to large. 1st has the power but no wheel speed, 2nd doesnt have the power to pull thru the deep stuff.
 

brianwmcdonald

Active member
Joined
Jun 8, 2007
Messages
107
Reaction score
10
Location
Leduc
Try cutting you carb spring in half, i did it with mine a few weeks ago and what a difference.
 
Top Bottom