13 to 14 M 800 skid upgrade

ACP

Active VIP Member
Joined
Jun 18, 2010
Messages
203
Reaction score
88
Location
Sprucegrove Ab.
Has any one either had a 13 and went to the 14 M 800? I'm looking for comments on the skid relocation from the two, or if anyone has just did the mod and is it beneficial and why?
 

stusnow

Active member
Joined
Dec 15, 2009
Messages
56
Reaction score
37
Location
Armstrong BC
In the process of doing this to my '13 right now. Bought the CR racing brackets and have them installed for this season. I'll also have to drill new hole for front skid bolt
 

ACP

Active VIP Member
Joined
Jun 18, 2010
Messages
203
Reaction score
88
Location
Sprucegrove Ab.
In the process of doing this to my '13 right now. Bought the CR racing brackets and have them installed for this season. I'll also have to drill new hole for front skid bolt

I thought you just moved the front to the 12 hole?
 

geordiep

Active member
Joined
Apr 25, 2007
Messages
131
Reaction score
121
Location
Calgary
Did you have to remove the existing drop mounts? Those hammer rivets are tough to get out.
 

stusnow

Active member
Joined
Dec 15, 2009
Messages
56
Reaction score
37
Location
Armstrong BC
I had dealer install for me. fairly big project to tackle. But yes they did remove the old brackets completely and put in the CR brackets which also add reinforcement to the tunnel
 

Slamnek

Active VIP Member
Joined
Nov 14, 2006
Messages
2,826
Reaction score
1,570
Location
Kitscoty
I had dealer install for me. fairly big project to tackle. But yes they did remove the old brackets completely and put in the CR brackets which also add reinforcement to the tunnel

What did that cost to get done? I am contemplating wether or not to try it myself or take it in.
 
Top Bottom