'05 1000 summit raves

DJK

Member
Joined
Dec 18, 2010
Messages
5
Reaction score
2
Location
Lacombe, AB
Gentlemen ... we have an electrical problem with this sled. It only reaches top RPM when the headlights are on. If they don't light up, it doesn't rev past 6500rpm. Fuse is OK. Acctuator opens only when lights are on. What is the connection between lights & acctuator? The rave valves are clean & freely move. Cables move freely.
Soooooooo boys can you help with this problem????????
Will appreciate any & all suggestions.
 

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,578
Reaction score
20,261
Location
Salmon Arm
The headlight should always be on. The ecu sends the signal to the headlight relay when you start it and it reaches 900rpm. Sounds like a bad load relay (R2) this relay controls the headlights, e-rave actuator, warmers, and tailight. Replace all your relays with bosch relays and buy an extra one to keep with the sled for when this happens again shortly to you out in the mountains.
 

hdkawi

Active VIP Member
Joined
May 9, 2009
Messages
741
Reaction score
450
Location
sherwoodpark
had the same problem when fuse #7 would burn out good ibea to carry extra fuses aud relays
 
Top Bottom