What did you do for your ATV today?

[imdoo'n]

I looked at those. But can't afford rims. I have 12" rims so tire choices are low. I seen these tires liked the look of them and pretty good price. 854 all said and done

i have a set of 14 inch rims i can get ya! if your interested.

 

[BIG DAWG]

Halo lights in and a bunch more wiring done for some of the rest of the LED lights ...

green lights yellow cage!!!
thats one tricked out rsx... lol
looks good man

 

[rzrgade]

LED brake lights done finally ....
Big job , but I managed to save a couple of bucks ...

 

[rzrgade]

Put my custom-for-me reprogrammed ECM in today....tested 'er out in the ditches. Wowzers!

Who did it ?

 

[Vance Matheson]

New tires installed. Just looking at my torque specs for the lugs. 120ft-lbs seem like to much

 

[rzrgade]

What tires ? 120 seems like a lot , I only use a bar and go by feel .... ends up at about 80lbs or so +\-

 

[pfi572]

^^^^
80 is about right. Too much and you will break lug bolts .
"XRS Maverick "
Re-check torque after a few Kms .

 

[whoDEANie]

I use an 80 ft-lb torque limiting bar on my impact gun. Never had an issue losing lug nuts and can still get them off when on the trail if need be.

 

[Vance Matheson]

The sludgeZillas on my ranger. Manual says 120ft-lbs unless I'm reading it wrong.

 

[whoDEANie]

The sludgeZillas on my ranger. Manual says 120ft-lbs unless I'm reading it wrong.//uploads.tapatalk-cdn.com/20170422/cafa6919f0a17a27b56e496994992414.jpg

Not to insult you or anything, but could it be NM?

Sent from my SM-G935W8 using Tapatalk

 

[pfi572]

^^^^^
Pending lug nut style?
Taper is 60 ft-lbs

 

[Vance Matheson]

No insult I read it 3 or 4 times to be sure i wasn't sleeping..ha!.

The manual is saying 163nm for aluminum and 81nm for steel

 

[Vance Matheson]

^^^^^
Pending lug nut style?
Taper is 60 ft-lbs

It's the top lug shown in the manual.

I set them to 80 as per your guys recommendation. I will bring the wrench with me on Sunday.

 

[rzrgade]

Them are mean lookin tires ...
I ran my old ranger at about 80ftlbs and never ever had any issues with loose wheel nuts ... with 32,s.
It is nice to be able to break them loose , if you have too with out so much force .
But your choice ....
Looks good with those tires

 

[Vance Matheson]

Thanks, they are a huge difference over stock for sure. Heading out with Neil Sunday to test them out.

 

[rzrgade]

If you are going from stock tires to these .. wow you will notice a huge difference, for sure ...
Let us know what all work like ...

 

[DaveB]

Who did it ?

Steve at Monster EFI. Its in and running. Gawd help anyone with a XXC (or any other machine really) who thinks the XMR is slow and limited....Moohahaha!

 

[rzrgade]

Similar to EVO ? But cheaper ?

 

[DaveB]

Monster is in Canada...Steve has been making the standalone EFI systems most Can Am racers use.

 

[rzrgade]

Where are thy located ? Might have to send the Mav ecm in ... great gains on the turbo I know .