TRA clutch arms

[oler1234]

So just going through the clutch and it looks like the bushing where it pivots on the arm is worn out pretty badly. I got new pins for the arms but still excess slope in one. Just wondering if you can change the bushing material out?, or am I better off buying 1 new arm.

 

[Bnorth]

So just going through the clutch and it looks like the bushing where it pivots on the arm is worn out pretty badly. I got new pins for the arms but still excess slope in one. Just wondering if you can change the bushing material out?, or am I better off buying 1 new arm.

I am trying to remember if you can just buy the lower arm bushing or not. I remember changing them once but I'm pretty sure I was just swapping them from a stock arm to a Dalton arm.

 

[Winter Brew]

New arms. I would do all 3, $25 each. If one is worn, the others arent far behind.

 

[stormtrooper]

You can buy bushings aftermarket but for the price just buy all 3 arms and be done with it. I think they are about 30 bucks each in Canada.

 

[dooin800]

Always do all three, if they are different it will it can wear on the sliding half bushing quicker.