Shredder
Active VIP Member
I’ve seen guys heating easy outs with torches to get these things out. Can I just drill them and get them out or what?? And then are the new rivets a pain to put in?? Why not just use bolts and nylon locknuts?
Similar. I use an Allen wrench that fits in the end of the rivit. Heat the wrench. Pull the rivit with pliers. 30 seconds.I use a tin roof screw and get it started in a little, the vise grips to gently pull as i heat with a micro torch on the aluminum rivet, takes 30 seconds tops per rivet