Raising the bar

[dodgeram18]

I have been doing some research and it looks like a 4" bar riser is the most i can do before extending brake line, throttle cable, etc. Does anyone have any input or experience with this? can i fit a 5" riser block or am i stuck with 4"? I do not want to extend my cables, etc. thanks. (sled is 06 rmk 900)

 

[powder junkie]

I have been doing some research and it looks like a 4" bar riser is the most i can do before extending brake line, throttle cable, etc. Does anyone have any input or experience with this? can i fit a 5" riser block or am i stuck with 4"? I do not want to extend my cables, etc. thanks. (sled is 06 rmk 900)

4 sounds like alot. I had 2" and would be close if i had bars slid down (adjustable post) and turn. Then i swapped out stock bars and riser for pro taper bars which ended up bit taller than stock & 2" riser and i could only use bars in middle or slid up, as cables were to tight to slid bars down, but didnt matter to me for my riding.

if u ride wit bars all the way up (forward) then u mite fit 4-5" but i dunno

 

[dodgeram18]

Yeah I'm always riding with my post in the up most position. I will do all I can to get slack for the most rise I can do and every inch helps for control. If I can get away with 5" in a fixed upright only position I'll do that if I'm stuck with 4" I guess that will do.