oil cable setting/ratio

oler1234

Active VIP Member
Joined
Nov 20, 2008
Messages
3,605
Reaction score
6,048
Location
Calgary, AB & Golden, BC
Anyone remember what you set the oil cable at??? i think it is 18mm??

Also with it set correctly anyone know what ratio this is at?? 50:1?
 

JoHNI_T

Active VIP Member
Joined
Apr 18, 2007
Messages
5,717
Reaction score
2,289
Location
Chestermere
Anyone remember what you set the oil cable at??? i think it is 18mm??

Also with it set correctly anyone know what ratio this is at?? 50:1?

THE 08 shop manual says 16.5 mm for 800r and 20mm for 600sdi
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,523
Reaction score
16,889
Location
DA Moose B.C
Set it at 16mm. A little extra oil can't hurt it.
Sent from my HTC-using Tapatalk
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,523
Reaction score
16,889
Location
DA Moose B.C
The free length of the cable from out of the splitter box

Sent from my HTC-Z710a using Tapatalk
 

oler1234

Active VIP Member
Joined
Nov 20, 2008
Messages
3,605
Reaction score
6,048
Location
Calgary, AB & Golden, BC
tex you got a rought idea how much oil you use for the amount of gas you burn??

My last setup i was about 1/4 tank of oil for 30L of gas
 

JoHNI_T

Active VIP Member
Joined
Apr 18, 2007
Messages
5,717
Reaction score
2,289
Location
Chestermere
tex you got a rought idea how much oil you use for the amount of gas you burn??

My last setup i was about 1/4 tank of oil for 30L of gas

i WOULD SAY MY 08 WAS VERY SIMALAR TO THAT,, SEEMED TO BE DOWN TO 3/4 MARK ON THE OIL AND BURNT ABOUT 3/4 OF MY FUEL OR FILLED IT UP AND ABOUT 30LITRES
 

JoHNI_T

Active VIP Member
Joined
Apr 18, 2007
Messages
5,717
Reaction score
2,289
Location
Chestermere
seemed to me a fair bit of oil usage,, I did not check the cable but late season did notice bit more exhaust/oil in the snow so maybe a bit fat,,
 

Moeman

Active member
Joined
Jan 2, 2009
Messages
47
Reaction score
28
Location
Between Here And There
Hi there, i was wondering if turning the adjuster in or clock wise will lean out the oil or ritchen it up. Also does it shorten or lenghten the amount of cable exposed?
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,523
Reaction score
16,889
Location
DA Moose B.C
The more slack in the cable.... The less oil.

Cause it takes more accel to start moving the oil cable then

Sent from my HTC-using Tapatalk
 

teeroy

Active VIP Member
Joined
Oct 7, 2007
Messages
9,100
Reaction score
14,101
Location
Roma, Alberta
The free length of the cable from out of the splitter box

Sent from my HTC-Z710a using Tapatalk
it's measured at the cable adjustment point on the right side of the sled, behind the muffler. not sure if that's what you mean?

oilcable.jpg
 
Top Bottom