Looking to get cdi re programmed for a 2003 vertical escape 800 polaris

[cnelson6]

Just as it says in the title Im looking to get a few things done to the cdi like getting the det sensor removed and im just wondering if anybody around calgary area does this or where would i need to send it to? Thanks in advance for the help!

 

[E-Zmoke]

Just purchase the cdi from an 02' it has the aggressive timing curve 28.5 or 29 deg I believe? In 03 they cut it way back. The 02 did not have the DET as well, probibly your beat bet. I don't think they are re programable

 

[cnelson6]

Do you know if the 2002 will run reverse? Thats would I would like to keep with it. I want everything but the det sensor

 

[snopro]

Don't. The 2002 was the 800 engine and the 2003 was the 800ho engine. Totally different cdi's and the 2002's had some serious mapping issues going on. Not a good year.

 

[snopro]

Do you know if the 2002 will run reverse? Thats would I would like to keep with it. I want everything but the det sensor

Reverse and non reverse cdi's are different part numbers as well.

 

[cnelson6]

Do you got any suggestions for what to do snopro? Im running a psi genesis in it and it had no provisions for the det

 

[E-Zmoke]

Their was no mapping issues on the 02! I ran this ECU for 5 yrs, went through 2 of them, No reverse on this ECU however. It was very good ECU. I had zero issues with it. Like I said they cut the timing curve back down in 03' this was because the 02' was cranking out alot of HP and cranks were busting. Simple solution to that problem - engine plate and torque arms.