high lifter lift kit

outlawbiker79

New member
Joined
Dec 23, 2009
Messages
2
Reaction score
0
Location
carlsbad,nm
hello all !! i'm fairly new to atv's, have an 2008 suzuki king quad & i'm ready for a few mods. i wan't to go from the stock 25x10x12 tire to 27x10x12 kenda executioner's all the way around. does anyone know if they will fit without lift ?? i was looking @ a 1-2" high lifter lift kit but then i was reading some other threads that were not to high on high lifter kits. any help would be appreciated.:confused:
 

Canadianking

Active VIP Member
Joined
Dec 25, 2009
Messages
310
Reaction score
26
Location
Vermilion AB
You should be fine fitting those tires without a lift kit. If you want a lift i would use the xtreme products atv lift. Its a two inch lift for the 750 and a 3 inch lift for the 700. I have a 3 inch on one of my 700 kings and have never had a problem with it. Hope this helps.
 

munhoez

Active VIP Member
Joined
Jan 27, 2009
Messages
4,395
Reaction score
592
Location
In a Dakota R/T, down by the South Sask. River
Ya stay away from the high lifter lift kit, will put ur axles in a not so healthy angle and u will wreck cv joints, u can use either a spatv lift(3") or just a 1" lift kit from kimpex or lightning products(only 120 smacks). I use the 1" on the demo i ride, its got 26" swamp foxes and brings the ground clearance up to 12.5" in front and 13.25" in the rear.
For ur tires no lift is needed as i have installed oodles of 27's on kings. I've even installed 28's w no lift but had to add 1" wheel spacers to clear the footrest mounts, and to stop the rubbing on the inner skirts on the front.
 

billybigrigs

Member
Joined
Nov 6, 2008
Messages
14
Reaction score
12
Location
saskatoon
I had a highlifter lift on my quad for 2 yrs, and took it off cause it was bent and getting wrecked. Don't bother with it, if you want a little lift put spacers on your springs.
 

arff

Active VIP Member
Joined
Apr 21, 2009
Messages
141,809
Reaction score
56,059
Location
Leduc
I am using RDC lift kits on the RZR and the quad.
No issues at all.

I am also using high lifter rear coil springs on my quad.
 
Top Bottom