Oct 12, 2016 #1 D DoubleYou Member Joined Oct 19, 2014 Messages 20 Reaction score 0 Location BC The 08's are different from the 09's. But what about the 2010's, are they the same as the 09's?
Oct 12, 2016 #2 neilsleder Active VIP Member Joined Oct 18, 2009 Messages 9,618 Reaction score 17,001 Location Leduc Alberta I do believe there is no difference on the outside. It's just the crank is different on the 10. 08-09 are the same engine. It's the 07 800r that was different Sent from my iPhone using Tapatalk
I do believe there is no difference on the outside. It's just the crank is different on the 10. 08-09 are the same engine. It's the 07 800r that was different Sent from my iPhone using Tapatalk
Oct 12, 2016 #3 tex78 Active VIP Member Joined Feb 5, 2010 Messages 17,523 Reaction score 16,889 Location DA Moose B.C Crank bolt hole is not drilled as far on 10 and up as the 90 and older sent while drinking tea's
Oct 12, 2016 Thread starter #4 D DoubleYou Member Joined Oct 19, 2014 Messages 20 Reaction score 0 Location BC Which bolt hole? So I could bolt a long block '10 into an 09 chassis with everything else bolting up to it?
Which bolt hole? So I could bolt a long block '10 into an 09 chassis with everything else bolting up to it?
Oct 12, 2016 #5 neilsleder Active VIP Member Joined Oct 18, 2009 Messages 9,618 Reaction score 17,001 Location Leduc Alberta DoubleYou said: Which bolt hole? So I could bolt a long block '10 into an 09 chassis with everything else bolting up to it? Click to expand... Yup bit tougher crank. I would put a ten motor in if I were you. Sent from my iPhone using Tapatalk
DoubleYou said: Which bolt hole? So I could bolt a long block '10 into an 09 chassis with everything else bolting up to it? Click to expand... Yup bit tougher crank. I would put a ten motor in if I were you. Sent from my iPhone using Tapatalk
Oct 12, 2016 Thread starter #6 D DoubleYou Member Joined Oct 19, 2014 Messages 20 Reaction score 0 Location BC Thanks. Was a bit unsure, looked at bmp & they list the y-pipe as being different for 08-09 & 10-11
Oct 12, 2016 #7 brian h Active VIP Member Joined Jul 21, 2009 Messages 814 Reaction score 1,427 Location edmonton alberta did a short block on my 08 and no difference brother did a short block on his 09 and had to buy a y-pipe,spacing and bolt size was different
did a short block on my 08 and no difference brother did a short block on his 09 and had to buy a y-pipe,spacing and bolt size was different